I think this is a "known" problem. Richard Weinberg Agere Systems 207-846-4539 -----Original Message----- From: Austin Franklin [mailto:austin@xxxxxxxxxxxx] Sent: Monday, March 14, 2005 2:43 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: Not able to print pdf's Hi Richard, I'll try that...but is it *supposed* to work that way? Regards, Austin -----Original Message----- From: Weinberg, Richard (Richard) [mailto:rweinberg@xxxxxxxxx] Sent: Monday, March 14, 2005 1:35 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: Not able to print pdf's I have had this problem. Print to file, to any post script printer. Use "universal" for sheet size. Then open the *.prn file with AcobatDistiller. Richard Weinberg Agere Systems 207-846-4539 -----Original Message----- From: Garrett Gilbertson [mailto:Garrett.Gilbertson@xxxxxxx] Sent: Monday, March 14, 2005 1:21 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: Not able to print pdf's Seems that we are using different versions here, V4 and V5. Garrett Gilbertson Phoenix Design Center 480-629-2470 "Austin Franklin" Sent by: 03/14/2005 11:15 AM Please respond to icu-pcb-forum To: icu-pcb-forum@xxxxxxxxxxxxx cc: Subject: [PCB_FORUM] Re: Not able to print pdf's Interesting. We are having the same problem... Are you using Acrobat writer, V6 (with updates)? Regards, Austin -----Original Message----- From: Garrett Gilbertson [mailto:Garrett.Gilbertson@xxxxxxx] Sent: Monday, March 14, 2005 1:07 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Not able to print pdf's 15.2 Windows. I cannot print out pdf's from Concept. Has anyone run into this before? Garrett Gilbertson Phoenix Design Center