[PCB_FORUM] Re: Not able to print pdf's
- From: "Austin Franklin" <austin@xxxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Tue, 15 Mar 2005 19:29:32 -0500
I was able to solve the ConceptHDL PDF printout problem we were having. The
PDF file had the right and bottom side clipped. We are printing a D size
page on a C size sheet...so it gets shrunk to fit...and what appeared to me
to be happening, is it was fitting it to page first, as in, overlaying the D
size on the C size, and clipping the graphics as described, then resizing it
to fit the page. So, instead, I tried reducing in the Acrobat print driver,
using %75, and it works perfectly now. If anyone isn't able to follow me
here, I can try to give a better explanation.
We are using the latest ISR on 15.2 with Acrobat 6.02.
Regards,
Austin
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list please login at
//www.freelists.org. Our list name is icu-pcb-forum
or go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
Want to post a job listing ? DON'T DO IT HERE!
Better yet, join our jobs listing forum.
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
POST: icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
Other related posts:
