Cheryl. I would like to know how you do this, I've been placing all pins on sch parts even the NC's. I use Orcad with Allegro. My understanding was I had to show all pins. -----Original Message----- From: Cheryl Johnson <cheryl.johnson@xxxxxxxxxxxxxxxx> To: icu-pcb-forum@xxxxxxxxxxxxx Sent: Thu, 1 Dec 2005 14:01:31 -0700 Subject: [PCB_FORUM] Re: Making NCs invisible in Orcad? There is not need to even put pin 2 on your symbol. Just put 1 and 3. Or you can place a no connect X on the pin to get rid of the box and show the no connect. Sincerely, ----------------------------------- Cheryl Johnson, C.I.D.+ Manager ExcelStor US Office, Engineering Services Email: cheryl.johnson@xxxxxxxxxxxxxxxx Tel: (303) 684-7291 Fax: (303) 684-7268 Mobile: (303) 809-5815 ----------------------------------- -----Original Message----- From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Claude Meyers Sent: Thursday, December 01, 2005 1:57 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: Making NCs invisible in Orcad? Try This 1. Open the Symbol 2. Say the no-connect is pin 2 of the Sot23, add the following property to the symbol: Name Value NC 2 3. Save the symbol and up date the design 4. Run the netlist, the footprint should now place without the Pin The format for multiple NC pins is 2,3,4,5 etc. Claude Meyers -----Original Message----- From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Allegro fan Sent: Thursday, December 01, 2005 12:31 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Making NCs invisible in Orcad? Hello All, I do not want no-connect pins to be visible in my Orcad schematics. Currently, my best solution is to use zero-length lines for pins like NC1, NC2, NC3, etc. On ICs it's not so bad because its nice sometimes to be able to verify that a pin is in fact a no connect. But, having a "you haven't connected a pin" square show up on my diode symbol is driving me nuts. The schematic symbol looks like a 2-terminal diode, but the footprint is an sot-23. I want the damn NC pin to go away on the schematic! Any help on this? Thanks, Ray ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum. SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx ----------------------------------------------------------- ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum. SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx ----------------------------------------------------------- ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum. SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx ----------------------------------------------------------- ___________________________________________________ Try the New Netscape Mail Today! Virtually Spam-Free | More Storage | Import Your Contact List http://mail.netscape.com