Yes for sure. Chris Brennan, C.I.D. PCB Designer Fidus Systems Inc. chris.brennan@xxxxxxxx Tel (613) 828 0063 x322 Fax (613) 828-3113 -----Original Message----- From: gary [mailto:rogiru@xxxxxxxxx] Sent: Wednesday, April 06, 2005 9:27 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: Instance property in Capture CIS This will work only for flat designs and simple hierarchical designs. Gary --- Chris Brennan <Chris.Brennan@xxxxxxxx> wrote: > Use Accessories -> Transfer Occ. Prop. To Instance > -> Push Occ. Prop. > Into Instance. > > CJB > > > Chris Brennan, C.I.D. > PCB Designer > Fidus Systems Inc. > chris.brennan@xxxxxxxx > Tel (613) 828 0063 x322 > Fax (613) 828-3113 > > -----Original Message----- > From: Naren [mailto:naren@xxxxxxxxxx] > Sent: Wednesday, April 06, 2005 12:23 AM > To: icu-pcb-forum@xxxxxxxxxxxxx > Subject: [PCB_FORUM] Re: Instance property in > Capture CIS > > Hello Mr Drew > > Can I make same instans & occurance > propertie same with > one command ? > If so then what is the command for it (If anyone > knows it)!! > Drew said: > > > > Hello, > > > > I have one little alteration to what David posted. > As soon as the > > part is first placed, the schematic has both an > instance and an > > occurrence whether the schematic is flat or not. > See Capture's online > > help for "instances and occurrences". It is > neither extremely simple > > nor anywhere near as complicated as pre v7.2 > definitions made it seem. > > > > Expanding on David's post... > > The way I see it is; if a part is *exactly* the > same (REFDES does not > > count) and I have two or more of that part, I have > one instance and > > two or more occurrences. If I select a part in > the schematic, edit a > > property of that part and update only the > "current" part, I have > > created another instance. *** The design cache > will show this. > > Different properties for the same part will create > more instances. > > More than one instance of what I thought was the > same part is > > noticeable when I create a BOM. Ah,.. some of > them are 0402s and some > > of them are 402s. Or, some of them are 1uF and > some of them are > > 1.0uF. > > ***After rereading the help file, I am not sure if > Capture thinks the > > same way I do.*** > > > > Pin swapping would not alter the occurrence or add > an instance. Yes, > > graphically the part will be different but the > properties of a part > > cannot change with a back-annotation by pin-swap > file only. > > Capture's use of instance and occurrence has > always caused me some > > confusion. I have always selected the default and > never looked back. > > > > Cheers! > > Drew > > > > > > ----- Original Message ----- > > From: "David Greig" <david@xxxxxxxxxxxxxx> > > To: <icu-pcb-forum@xxxxxxxxxxxxx> > > Sent: Tuesday, April 05, 2005 6:55 AM > > Subject: [PCB_FORUM] Re: Instance property in > Capture CIS > > > > > > > > If you had a flat schematic - no hierarchy then > you would only have > > instances. Pspice is flat (and not particularly > Berkley!). PCB type > > schematics can be hierarchical. > > > > Occurrences are the different repetitions of the > original instance > > when a > > hierarchy block is repeated. > > > > That's the basic idea, instances are the white > properties, the dashed > > bits > > are properties inherited from the library and > unchanged, yellow bits > > are the > > occurrence properties and non-dashed have been > changed either directly > > or > > via backanno etc. > > > > That's the basic idea, but we are talking > Orcad_speak so don't take it > > too > > literally! > > > > Surprisingly pin-swapping a flat file does not > generate occurrences > > even > > although the symbols pins get shifted. Guess that > just a changed cache > > symbol. > > > > Best Regards > > > > David Greig > > ______________________________ > > GigaDyne Ltd > > Buchan House > > Carnegie Campus > > Dunfermline KY11 8PL > > United Kingdom > > t: +44 (0)1383 624 975 > > ______________________________ > > > > -----Original Message----- > > From: Naren [mailto:naren@xxxxxxxxxx] > > Sent: 2005-April-05 14:24 > > To: icu-pcb-forum@xxxxxxxxxxxxx > > Subject: [PCB_FORUM] Instance property in Capture > CIS > > > > Hi all > > > > I am using Cadence 15.2 PCB package. For schematic > purpose I am using > > Capture CIS. > > > > My question is what is instance & occurance > property of the components > > ? > > Can we change with one command (If any) If both > are differ. > > > > > > > ----------------------------------------------------------- > > To subscribe/unsubscribe: > > Send a message to > icu-pcb-forum-request@xxxxxxxxxxxxx > > with a subject of subscribe or unsubscribe > > > > To view the archives of this list please login at > > //www.freelists.org. Our list name is > icu-pcb-forum > > or go to > //www.freelists.org/archives/icu-pcb-forum/ > > > > Problems or Questions: > > Send an email to > icu-pcb-forum-admins@xxxxxxxxxxxxx > > > > Want to post a job listing ? DON'T DO IT HERE! > > Better yet, join our jobs listing forum. > > > > SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx > > POST: icu-jobs-forum@xxxxxxxxxx > > > ----------------------------------------------------------- > > > > > -- > "Keep looking foreward" > > Regards > Naren Thesia > Member CAD > D'GIPRO SYSTEMS PVT. LTD. BANGALORE > TEL: 080-25219017/18 (O) > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > ++++ > This e-mail is intended for the use of the > individual or entity named > above and may contain information that is > confidential and > privileged. If you are not the intended recipient, > you are hereby > notified that any dissemination, distribution or > copying === message truncated === __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum. SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx ----------------------------------------------------------- ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum. SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx -----------------------------------------------------------