Richard, I have been using a dual processor workstation for several years. I like it because when I am routing a board, cpu1 100%, it allows me to continue working in the database, cpu2, without seeing any lag. Just my 2cents, David -----Original Message----- From: richard moffat [mailto:richard.moffat@xxxxxxxxxxxxxxxxxxx] Sent: Thursday, June 24, 2004 5:37 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Hardware Platforms (was Re: OT operating system) Hi How good is a dual processor setup? I understood Allegro truly doesn't support it, but if someone could give advice, I'd appreciate it! Cheers, Richard >>>snip I have a dual xeon with a gig of mem. And some other stuff, of course. >>> NOTICE: This message contains privileged and confidential information intended only for the use of the addressee named above. If you are not the intended recipient of this message you are hereby notified that you must not disseminate, copy or take any action in reliance on it. If you have received this message in error please notify Allied Telesyn Research Ltd immediately. Any views expressed in this message are those of the individual sender, except where the sender has the authority to issue and specifically states them to be the views of Allied Telesyn Research. ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum. SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx ----------------------------------------------------------- ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum. SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx -----------------------------------------------------------