I think with some text and/or excel work it can be modified to be used with allegro.
I've done this for MBS netlist. You need to to build device types for it too. Moris Ruso----- Original Message ----- From: "Dharma Kemp-Bresett" <dharma@xxxxxxx>
To: <icu-pcb-forum@xxxxxxxxxxxxx> Sent: Monday, March 21, 2011 5:01 PM Subject: [PCB_FORUM] Getting a cadstar netlist into an allegro board file?
Hello Everyone, I was hoping someone out there has successfully loaded a cadstar netlist into an allegro board file... If so, could you share what steps you took?If not, has anyone heard of a translation program or other method for doingso? Thanks, Dharma KAW/USA Suite 448 20 Trafalgar Square Nashua, NH 03063 Confidentiality Notice: This email and any accompanying documents containinformation that is confidential, privileged or exempt from disclosure under applicable law and is intended for the exclusive use of the addressee. Thisinformation is private and protected by law. If you are not the intended recipient, or have received this email in error, you are hereby notified that any disclosure, copying, distribution or use of the contents of this document in any manner is strictly prohibited. ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribeTo view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx-----------------------------------------------------------
-----------------------------------------------------------To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx -----------------------------------------------------------