[PCB_FORUM] Re: Disappearing Ratsnests
- From: "Vince Di Lello" <vince.dilello@xxxxxxxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Mon, 18 Apr 2005 12:39:59 -0700
Thanks Richard ...that did the trick.
Vincent Di Lello, CID+
Senior CAD Designer
Kaleidescape Canada, Inc.
vdilello@xxxxxxxxxxxxxxxx
(v) 519.772.6418
(f) 519.772.6401
www.kaleidescape.com
________________________________
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Weinberg,
Richard (Richard)
Sent: Monday, April 18, 2005 3:35 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Disappearing Ratsnests
On the options tab, turn of "Stretch etch".
Richard Weinberg
Agere Systems
207-846-4539
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Vince Di Lello
Sent: Monday, April 18, 2005 3:35 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Disappearing Ratsnests
Good morning fellow designers,
Ladies & Gentlemen, during a Move of a symbol, the ratsnest disappear
and then reappear when I put the symbol down on the board. Is there a
setting that anyone knows of that will 1: keep the ratsnest on during
the move, and 2: length minimize the ratsnest as I move the part around
on my cursor? Just wondering ..... thanks as always and I hope everyone
has a great day.
Vincent Di Lello, CID+
Senior CAD Designer
Kaleidescape Canada, Inc.
vdilello@xxxxxxxxxxxxxxxx
(v) 519.772.6418
(f) 519.772.6401
www.kaleidescape.com
Other related posts:
