[PCB_FORUM] Re: Converting .GDS Files from Cadence Virtuoso to Allegro .DRA
- From: "Scott, Ron" <rg-scott@xxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Sun, 6 Mar 2005 08:31:52 -0600
George,
You are absolutely correct. I don't have an APD license that I know of,
I'll have to ask corporate about that. I put in a SR and Cadence came
back in minutes to help with my problem and offer a solution.
Regards,
Ron Scott C.I.D.
Texas Instruments
Tel: 214.567.4715
Cell: 972.816.7978
rg-scott@xxxxxx
_____
From: george.h.patrick@xxxxxxxxxxxxxx
[mailto:george.h.patrick@xxxxxxxxxxxxxx]
Sent: Friday, March 04, 2005 17:28
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Converting .GDS Files from Cadence Virtuoso to
Allegro .DRA
I have heard (but not personally seen) that the flow for this is
supposed to be IC tool > APD > Allegro. Do you have an APD license?
--
George Patrick
Tektronix, Inc.
Central Engineering, PCB Design Group
P.O. Box 500, M/S 39-512
Beaverton, OR 97077-0001
Phone: 503-627-5272 Fax: 503-627-5587
http://www.tektronix.com <http://www.tektronix.com/>
http://www.pcb-designer.com <http://www.pcb-designer.com/>
It's my opinion, not Tektronix'
-----Original Message-----
From: Scott, Ron [mailto:rg-scott@xxxxxx]
Sent: Friday, March 04, 2005 14:26
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Converting .GDS Files from Cadence Virtuoso
to Allegro .DRA
Importance: High
All,
Here's a little something for a Friday. I need to convert a
file from the IC layout tool to a physical part in Allegro. I can
attempt to import the streaming file but Allegro wants to make it .brd
file. The positioning is extremely important because this is what is
called a bump die which has no leads and connects directly to the IC's
substrate. I know this can be done because I have a few examples but the
original source is not available. Any help will be great.
Regards,
Ron Scott C.I.D.
Texas Instruments
Tel: 214.567.4715
Cell: 972.816.7978
rg-scott@xxxxxx
Other related posts:
