WHy are you importing gerber data? What CAD system was the original database done in? -----Original Message----- From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Vivekananda R K - CTD, Chennai Sent: Wednesday, April 27, 2005 9:48 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Conversion from Cam350 to PADS and PADS to ALLEGRO Hi, Any body having Experience in Conversion from Cam350 to powerpcb and powerpcb to allegro I have Tried by following steps. Cam 350 1.imported Gerber's and build a part also I have extracted the net list. 2.Exported the gerber as .ASC format in powerpcb ver2.0 Powerpcb 1.Imported the .ASC file in to Powerpcb 2.Again I have exported as .ASC format. Allegro 1.Imported .asc file(which i have exported from pads) in to allegro by using file /Import/PADS/ option. The time of conversion allegro shows error and it closing.(pls find attached the viewlog file) I opened the board file which is created in allegro, I am missing the Traces. Components are coming. line,Board outline is coming in allegro. But traces are not coming in to allegro. Doubts 1.Why the traces are not importing in to allegro 2.Also Allegro is not taking directly the .ASC exported from CAM350.Allegro is accepting only the .asc file which exported only from powerpcb. Why ? 3.Pls Explain the step by step flow for this conversion. Thanks in advance. Regards K.Vivek Pcb Designer, Hcl Technologies, Chennai, India. <<vielogerr.txt>> DISCLAIMER This message and any attachment(s) contained here are information that is confidential, proprietary to HCL Technologies and its customers. Contents may be privileged or otherwise protected by law. The information is solely intended for the individual or the entity it is addressed to. If you are not the intended recipient of this message, you are not authorized to read, forward, print, retain, copy or disseminate this message or any part of it. If you have received this e-mail in error, please notify the sender immediately by return e-mail and delete it from your computer ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum. SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx -----------------------------------------------------------