[PCB_FORUM] Can't remember anything.

  • From: sjchar3@xxxxxxxxxxxx
  • To: icu-pcb-forum@xxxxxxxxxxxxx
  • Date: Mon, 9 Apr 2012 15:29:21 -0400 (EDT)


IT Loaded Cadence on a laptop (win7) and Orcad and Allegro (16.3)  both work. I 
opened the schematic and ran update netlist and checked box to "Create or 
Update PCB" and "Open Board in Allegro PCB editor", but nothing is happening. 
Normally Allegro would pop up with updated board. 

Been awhile but is there something I'm missing, why doesn't Allegro 
automatically pop up?

I also did the setup in Create Netlist, but that path keeps disappearing.

Thanks for any input.


Other related posts: