[PCB_FORUM] Allegro-Idf-SolidWorks
- From: gnieski_mike@xxxxxxx
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Tue, 12 Dec 2006 07:48:55 -0500
Just looking for a little feedback from anyone that is using IDF
to transfer mechcad/ecad
data using Solidworks.
Regarding the use of transferring placement how do most people
handle their placement?
With or without reference designators?
If placement is done without reference designators how do they
map the Solidworks parts
with the Allegro jedecs?
I'm aware that the origin and rotation of both the mechanical
model and Allegro footprint need
to be the same, but what happens if the mechanical model and the
Allegro footprint name are
different?
thanks,
Mike Gnieski
EMC2 Corp.
Hopkinton, MA 01748
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
Other related posts:
