[PCB_FORUM] Re: Allegro acting weird
- From: "Isaacson, Lynn" <lynn.isaacson@xxxxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Wed, 24 Oct 2007 14:52:29 -0700
Maybe you need to re-install Cadence? Also try removing some of the
other files in the pcbenv folder -maybe one of them got corrupted. Just
move them to a backup directory -leave the env file (if it is known
good). T
Good luck.
Lynn Isaacson, CID+, CIS
PCB Design & Engineering Services Supervisor
Physio-Control, Inc.
Direct: 425-867-4443 Fax: 425-867-4462
lynn.isaacson@xxxxxxxxxxxxx
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of
george.h.patrick@xxxxxxxxxxxxx
Sent: Wednesday, October 24, 2007 1:42 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Allegro acting weird
That's the first thing I did :)
Thanks, Frank.
--
George Patrick
Tektronix, Inc.
Central Engineering, EDS Applications Support P.O. Box 500, M/S 39-512
Beaverton, OR 97077-0001
* 503-627-5272 (voice) * 503-627-5587 (fax)
http://www.tektronix.com http://www.pcb-designer.com
"Off-Grid and Proud of it!"
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of fxf
Sent: Wednesday, October 24, 2007 12:50
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Allegro acting weird
See if you /tmp is full ( df /tmp)
george.h.patrick@xxxxxxxxxxxxx wrote:
> Y'all:
> I have a couple users having problems with Allegro, and it's got me
> stumped. I am hoping somebody has seen this before.
> The original symptom was that Allegro crashes when the user attempts
> to measure anything. A confirmer window pops that says *"Failed to
> open file '/tmp/#Taaaaab03348.tmp' *(the number is different when
> Allegro is shut down but the same as long as you don't shut down). I
> did all the usual: cleared out the temp directory, verified that
> environment variables were correct, looked at the env file, waved my
> sacred rattle around. Nothing out of the ordinary, just the same as
> all the other users around here.
> Then it got weird.
> I tried to look at the environment by typing "set" in the Allegro
> command line, nothing happened (no window with all the environment
> variables). I tried to look at the Design Paths in the Setup>User
> Preferences form, some of the browse buttons looked like text boxes,
> and if I clicked any of them they couldn't find the variable and
> popped the now familiar warning about the *"Failed to open file
> '/tmp/#Taaaaab03348.tmp'*.
> PLEASE tell me somebody has seen this and has an easy fix. I am
> digging around for my windows XP CDROM 'cause I have a sinking feeling
> that the OS has gone bye-bye and the user is _not_ going to be happy.
:(
> --
> George Patrick
> *Tektronix, Inc.*
> Central Engineering, EDS Applications Support
>
> P.O. Box 500, M/S 39-512
> Beaverton, OR 97077-0001
> A* 503-627-5272 (voice) ? 503-627-5587 (fax) http://www.tektronix.com
> <http://www.tektronix.com/> http://www.pcb-designer.com
> <http://www.pcb-designer.com/>
>
> /*"Off-Grid and Proud of it!"*/
>
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
___________________________________________________________________________________________________
CONFIDENTIALITY AND PRIVACY NOTICE
Information transmitted by this email is proprietary to Medtronic and is
intended for use only by the individual or entity to which it is addressed, and
may contain information that is private, privileged, confidential or exempt
from disclosure under applicable law. If you are not the intended recipient or
it appears that this mail has been forwarded to you without proper authority,
you are notified that any use or dissemination of this information in any
manner is strictly prohibited. In such cases, please delete this mail from your
records.
To view this notice in other languages you can either select the following link
or manually copy and paste the link into the address bar of a web browser:
http://emaildisclaimer.medtronic.com
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
Other related posts:
