Hi Steve If you tag the nets of interest with an ECL property, you can run an ECL long report. That may get what your looking for. "Mariani, Stephen" wrote: > I am looking to get a listing on a complete net or group of nets, it's > length from pin to pin to pin to pin. > And a total length. > > I am trying to use Etch length by pin pair report but this design is > so large that Allegro hangs up. > Is there a way to do this through a command file? > > I looked through the help but can only find: > > Report -??? Board_name output_name > > ??? Is what I am looking for or if anyone knows a better way please > let me know. > > Thanks > Steve > > Stephen Mariani > Mercury Computer Systems, Inc. > 199 Riverneck Road > Chelmsford, MA 01824 > Phone: (978) 967-1855 > Cell Phone: (978) 761-4101 > Fax: (978) 244-0520 > mailto:smariani@xxxxxx -- Matt Dunn Director of Design Operations Applied CAD Knowledge, Inc. mdunn@xxxxxxxxxxxxxx 978-649-9800