[PCB_FORUM] Re: Allegro 15.2 Listing
- From: "Mike Wilson" <michael.w.wilson@xxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Fri, 15 Jul 2005 12:00:50 -0400
Allegro 15.2 ListingSteve, I think you can get such a report from the InterComm
tool from PTC. It comes out in a neat Excel spreadsheet.
Contact Bob Kelleher at EMA-EDA at 607-754-1882. They distribute the InterComm
tool for PTC.
----- Original Message -----
From: Mariani, Stephen
To: icu-pcb-forum@xxxxxxxxxxxxx
Sent: Friday, July 15, 2005 10:44 AM
Subject: [PCB_FORUM] Allegro 15.2 Listing
I am looking to get a listing on a complete net or group of nets, it's length
from pin to pin to pin to pin.
And a total length.
I am trying to use Etch length by pin pair report but this design is so large
that Allegro hangs up.
Is there a way to do this through a command file?
I looked through the help but can only find:
Report -??? Board_name output_name
??? Is what I am looking for or if anyone knows a better way please let me
know.
Thanks
Steve
Stephen Mariani
Mercury Computer Systems, Inc.
199 Riverneck Road
Chelmsford, MA 01824
Phone: (978) 967-1855
Cell Phone: (978) 761-4101
Fax: (978) 244-0520
mailto:smariani@xxxxxx
Other related posts:
