Mike, Thanks. That was actually a typo in my last message, I meant xml extension, not htm (although I tried it both). Anyway, this one is somewhat better, because I am not getting the error any more, but I am still not seeing "clean" text in Explorer. I get those <> stuff too, like this: <?xml version="1.0" encoding="ISO-8859-1" ?> <!DOCTYPE ibismacro (View Source for full doctype...)> - <module> /* <mname>IBIS_R</mname> Are you saying that this cannot be done in a clean way? Forgive me for my ignorance, but I am not very familiar with the XML/HTML world... Thanks, Arpad ================================================================= -----Original Message----- From: Mike LaBonte (milabont) [mailto:milabont@xxxxxxxxx] Sent: Monday, October 03, 2005 11:00 AM To: Muranyi, Arpad; ibis-macro@xxxxxxxxxxxxx Subject: RE: [ibis-macro] Re: XML format sample Arpad, I sort of got it working. IE will not open it as xml unless the extension is .xml. Then another problem is that the first 3 lines of the file have to be uncommented. Actually 2 lines if you take out the DTD declaration. Mike -----Original Message----- From: ibis-macro-bounce@xxxxxxxxxxxxx [mailto:ibis-macro-bounce@xxxxxxxxxxxxx] On Behalf Of Muranyi, Arpad Sent: Monday, October 03, 2005 11:27 AM To: ibis-macro@xxxxxxxxxxxxx Subject: [ibis-macro] Re: XML format sample Mike, Sorry for such a novice question, but how do I get this sample displayed in a browser? I tried by saving off the sample with an htm file extension and I also removed the stuff outside the section: /*==================================================================== <module> <mname>IBIS_R</mname> <mdesc> A simple resistor. The resistor value is calculated: R = Rval * Scale </mdesc> <mterm> <tname>p</tname> <tdesc>Positive resistor terminal</tdesc> </mterm> <mterm> <tname>n</tname> <tdesc>Negative resistor terminal</tdesc> </mterm> <mparam> <pname>Rval</pname> <pdesc>Resistance value</pdesc> </mparam> <mparam> <pname>Scale</pname> <pdesc>Scaling factor for resistance value</pdesc> </mparam> <mexample> VAMS: IBIS_R #(.Rval(100)) R1 (clk_n, clk_p); </mexample> <mexample> SPICE: R1 clk_n clkp IBIS_R Rval=100 </mexample> */ //<msource> module IBIS_R (p, n); electrical p, n; branch (p, n) Out; parameter real Rval = 1.0; parameter real Scale = 1.0; analog begin V(Out) <+ Scale * Rval * I(Out); end endmodule //</msource> /* </module> */ but I was only getting errors. Could you explain please how it would show up in a browser? Thanks, Arpad ======================================================== --------------------------------------------------------------------- IBIS Macro website: http://www.sisoft.com/ibis-macro IBIS Macro archives: //www.freelists.org/archives/ibis-macro To unsubscribe send an email: To: ibis-macro-request@xxxxxxxxxxxxx Subject: unsubscribe