Hi, Arpad; In the meeting we said we need to keep Boolean Use_Init_Output. But in your flow diagram there is no place for this parameter. Are we keeping Use_Init_Output or not? Are your plots meant to cover all possible flows? If not, then what does the standard say about those combinations that are not in the plots? Can you please clarify? Thanks, Fangyi -----Original Message----- From: ibis-macro-bounce@xxxxxxxxxxxxx [mailto:ibis-macro-bounce@xxxxxxxxxxxxx] On Behalf Of Muranyi, Arpad Sent: Tuesday, October 27, 2009 8:40 PM To: IBIS-ATM Subject: [ibis-macro] Files uploaded to ATM web site Hello everyone, This is to inform you that three new files have been uploaded to the IBIS-ATM web site under the Archives section. 1) Kumar's "IBIS AMI flows" presentation from our teleconference a week ago 2) Walter's "IBIS 5.0 AMI Basic Principles" presentation from our teleconference a week ago 3) My flow diagrams which were discussed in today's teleconference Enjoy! Arpad ===================================================== --------------------------------------------------------------------- IBIS Macro website : http://www.eda.org/pub/ibis/macromodel_wip/ IBIS Macro reflector: //www.freelists.org/list/ibis-macro To unsubscribe send an email: To: ibis-macro-request@xxxxxxxxxxxxx Subject: unsubscribe --------------------------------------------------------------------- IBIS Macro website : http://www.eda.org/pub/ibis/macromodel_wip/ IBIS Macro reflector: //www.freelists.org/list/ibis-macro To unsubscribe send an email: To: ibis-macro-request@xxxxxxxxxxxxx Subject: unsubscribe