[ibis-macro] Re: BIRD158.6 draft3

  • From: "Bob Ross" <bob@xxxxxxxxxxxxxxxxx>
  • To: <wkatz@xxxxxxxxxx>, <Arpad_Muranyi@xxxxxxxxxx>, <ibis-macro@xxxxxxxxxxxxx>
  • Date: Wed, 16 Aug 2017 11:51:28 -0700

All,

 

After a quick look, I like the simplifications.

 

Bob

 

From: ibis-macro-bounce@xxxxxxxxxxxxx [mailto:ibis-macro-bounce@xxxxxxxxxxxxx] ;
On Behalf Of Walter Katz
Sent: Wednesday, August 16, 2017 11:18 AM
To: Arpad_Muranyi@xxxxxxxxxx; ibis-macro@xxxxxxxxxxxxx
Subject: [ibis-macro] Re: BIRD158.6 draft3

 

Arpad,

 

Exactly so.

 

Walter

 

Walter Katz

wkatz@xxxxxxxxxx

Phone 303.449-2308

Mobile 303.335-6156

From: ibis-macro-bounce@xxxxxxxxxxxxx [mailto:ibis-macro-bounce@xxxxxxxxxxxxx] ;
On Behalf Of Muranyi, Arpad
Sent: Wednesday, August 16, 2017 1:11 PM
To: ibis-macro@xxxxxxxxxxxxx
Subject: [ibis-macro] Re: BIRD158.6 draft3

 

All,

 

I agree with Walter’s suggestion of removing all that stuff from this BIRD.  
There is no

need to over complicate this with package modeling related features when this 
BIRD

started out as a buffer model improvement proposal.  The package improvements 
are

addressed in BIRD189 already, there is no need to introduce yet another way to 
write

package models for IBIS.

 

To summarize, the TS4file is strictly a replacement for [Model].  If the .ibs 
file has only

legacy package models, the buffer model is connected to the pad, but if the 
package

model uses the new BIRD189 features and defines an on-die interconnect, than the

TS4file is connected to the “buffer terminal” (not the pad).  Walter, is this 
what you

intended with this latest change?

 

Thanks,

 

Arpad

====================================================================

From: Walter Katz [mailto:wkatz@xxxxxxxxxx] ;
Sent: Wednesday, August 16, 2017 9:26 AM
To: radek_biernacki@xxxxxxxxxxxx; ibis-macro@xxxxxxxxxxxxx
Subject: RE: [ibis-macro] BIRD158.6 draft3

 

All,

 

I am including BIRD158.6 draft3 with all existing changes accepted, and my 
recommended changes which are to remove all reference to terminals at pad or 
pin. 

 

I strongly recommend that they be at the buffer. There should not be any 
package interconnect in the Ts4file (we should certainly not recommend doing 
so) then the package model should not include that interconnect.

 

This is simple, it matches exactly how IC vendors are generating these Ts4files.

 

Walter

 

Walter Katz

wkatz@xxxxxxxxxx

Phone 303.449-2308

Mobile 303.335-6156

 

 

From: ibis-macro-bounce@xxxxxxxxxxxxx [mailto:ibis-macro-bounce@xxxxxxxxxxxxx] ;
On Behalf Of BIERNACKI,RADEK (K-Sonoma,ex1)
Sent: Wednesday, August 16, 2017 12:37 AM
To: ibis-macro@xxxxxxxxxxxxx
Subject: [ibis-macro] BIRD158.6 draft3

 

Hi All,

 

I attach a finished draft 3 of BIRD 158.6 as shown and discussed at today’s ATM 
meeting. Please review it before next Tuesday’s ATM meeting for (hopefully) 
final discussion and deciding on the recommendation to the IBIS Open Forum.

 

Mike, could you please post it at the ATM archive site.

 

Thanks,

Radek

Other related posts: