Looking at these new sentences under the Transmitter Analog Circuit
figure:
For logic level 1 Vp=Tx_V / 2 and Vn=-Tx_V / 2 where Tx_V is a reserved
parameter (defined below). For logic level 0 Vp=-Tx_V / 2 and Vn=Tx_V / 2.
The step stimulus is a differential voltage waveform Vp - Vn when the
logic level is switched from 0 to 1.
I think the "where" in the first sentence should have a comma before it.
Also I'm not sure the step waveform is well enough described in the third
sentence. Maybe we could use the SPICE-like syntax and have something
like:
The step stimulus is a differential voltage waveform V(Vp, Vn) that
changes from -Tx_V to Tx_V when the logic level is switched from 0 to 1.
Lastly I would suggest adding captions to the figures. Although the
Editorial Task Group will determine figure numbers later, it would help to
agree on the caption text now.
Mike
From: ibis-macro-bounce@xxxxxxxxxxxxx
[mailto:ibis-macro-bounce@xxxxxxxxxxxxx] On Behalf Of Walter Katz
Sent: Tuesday, September 12, 2017 4:30 PM
To: IBIS-ATM <ibis-macro@xxxxxxxxxxxxx>
Subject: [ibis-macro] BIRD 158.6_draft6
All,
This BIRD_158.6_draft6.docx is based my BIRD_158.6_draft4.docx with
figures copied from Radek's BIRD_158.6_draft5.docx. I also removed an
additional paragraph that referenced Ts4file_Boundary.
Walter
Walter Katz
<mailto:wkatz@xxxxxxxxxx> wkatz@xxxxxxxxxx
Phone 303.449-2308
Mobile 303.335-6156