Bob,
I don't think it is a "repeat". The first set is to illustrate Usage Info and
the
second set is to illustrate Usage Out. My vague recollection is that the whole
reason the 2nd example was included was to illustrate that for Usage Out the
value is not needed.
Thanks,
Arpad
============================================================
From: ibis-editorial-bounce@xxxxxxxxxxxxx
[mailto:ibis-editorial-bounce@xxxxxxxxxxxxx] On Behalf Of Bob Ross
Sent: Tuesday, July 3, 2018 4:58 PM
To: ibis-editorial@xxxxxxxxxxxxx
Subject: [ibis-editorial] PAM4 Thresholds Editorial Issue.
All,
We for PAM4_*Threshold parameters, the second set of (Value *) words are
missing (pages 235-236)
The bigger question is why are we repeating the Reserved parameters in the last
three parameter lines below (red)?
Examples:
(PAM4_LowerThreshold (Usage Info) (Value -0.333) (Type Float)
(Description "Lower eye voltage threshold for waveform and eye processing.")
)
(PAM4_CenterThreshold (Usage Info) (Value 0.0) (Type Float)
(Description "Center eye voltage threshold for waveform and eye
processing.")
)
(PAM4_UpperThreshold (Usage Info) (Value 0.333) (Type Float)
(Description "Upper eye voltage threshold for waveform and eye
processing.")
)
(PAM4_LowerThreshold (Usage Out) (Type Float)
(Description "Lower eye voltage threshold returned by AMI_Init.")
)
(PAM4_CenterThreshold (Usage Out) (Type Float)
(Description "Center eye voltage threshold returned by AMI_Init.")
)
(PAM4_UpperThreshold (Usage Out) (Type Float)
(Description "Upper eye voltage threshold returned by AMI_Init.")
)
The red lines should be deleted.
Bob