All,
We for PAM4_*Threshold parameters, the second set of (Value *) words are
missing (pages 235-236)
The bigger question is why are we repeating the Reserved parameters in the
last three parameter lines below (red)?
Examples:
(PAM4_LowerThreshold (Usage Info) (Value -0.333) (Type Float)
(Description "Lower eye voltage threshold for waveform and eye processing.")
)
(PAM4_CenterThreshold (Usage Info) (Value 0.0) (Type Float)
(Description "Center eye voltage threshold for waveform and eye
processing.")
)
(PAM4_UpperThreshold (Usage Info) (Value 0.333) (Type Float)
(Description "Upper eye voltage threshold for waveform and eye
processing.")
)
(PAM4_LowerThreshold (Usage Out) (Type Float)
(Description "Lower eye voltage threshold returned by AMI_Init.")
)
(PAM4_CenterThreshold (Usage Out) (Type Float)
(Description "Center eye voltage threshold returned by AMI_Init.")
)
(PAM4_UpperThreshold (Usage Out) (Type Float)
(Description "Upper eye voltage threshold returned by AMI_Init.")
)
The red lines should be deleted.
Bob
