[ibis-editorial] Re: IBIS-AMI Reserved_Parameter Draft Template (Sect. 6c)
- From: "Muranyi, Arpad" <Arpad_Muranyi@xxxxxxxxxx>
- To: "ibis-editorial@xxxxxxxxxxxxx" <ibis-editorial@xxxxxxxxxxxxx>
- Date: Wed, 24 Aug 2011 14:07:13 +0000
Bob,
I finally took some time to look at the Word document you
distributed with our email below. I like it but I have a
few issues.
My biggest problem is that "Usage", "Type", "Format", "Default",
"Description" are really not the same categories as "Parameter",
"Required", "Usage Rules", "Other Notes", "Examples", yet you
used these in the same formatting level, in italics.
In addition, if I remember correctly, some of these have their
own rules about being required or not, for example, "Format" is
optional after 5.1(? can't remember the rules now).
Also, I am always confused by "Value", because I never know
what it refers to, a "literal constant" or the keyword "Value".
Otherwise I like the systematic format a lot...
Thanks,
Arpad
====================================================================
-----Original Message-----
From: ibis-editorial-bounce@xxxxxxxxxxxxx
[mailto:ibis-editorial-bounce@xxxxxxxxxxxxx] On Behalf Of Bob Ross
Sent: Wednesday, August 10, 2011 12:26 PM
To: ibis-editorial@xxxxxxxxxxxxx
Subject: [ibis-editorial] IBIS-AMI Reserved_Parameter Draft Template (Sect. 6c)
Editing Group:
Attached is a draft template for Section 6c Reserved parameters
that is modeled after the Keyword template - for group and
Lou's consideration concerning Section 6c reformatting.
This template just reformats Version 5.0 text into a "Version 5.1"
document as is. But it does contain a Version field for Sub-version
specific changes.
Since Version 5.1 will now contain Reserved_parameter and other
changes (Including the AMI_Version), the version references
would be modified. For example, all "after [IBIS Ver] 5.1"
references to "after [IBIS Ver] 5.0". Also [IBIS Ver] 5.2 would
change to [IBIS Ver] 5.1.
Bob
--
Bob Ross
Teraspeed Consulting Group, LCC
http://www.teraspeed.com
bob@xxxxxxxxxxxxxx
Direct : 503-246-8048
Teraspeed Labs: 503-430-1065
Headquarters: 401-284-1827
Teraspeed is a registered service mark of Teraspeed Consulting Group LLC
Other related posts:
