Thanks to Mike LaBonte, the correct file has now been posted. My apologies for
any inconvenience.
* MM
From: ibis-editorial-bounce@xxxxxxxxxxxxx <ibis-editorial-bounce@xxxxxxxxxxxxx>
On Behalf Of Mirmak, Michael
Sent: Monday, November 12, 2018 5:11 PM
To: Bob Ross <bob@xxxxxxxxxxxxxxxxx>; ibis-editorial@xxxxxxxxxxxxx
Subject: [ibis-editorial] Re: IBIS 7.0 Editorial Checklist and Draft 181109
Bob,
Good catch - the uploaded version appears to be corrupted. I'll work with Mike
to get the correct version on-line.
* MM
From: Bob Ross <bob@xxxxxxxxxxxxxxxxx<mailto:bob@xxxxxxxxxxxxxxxxx>>
Sent: Monday, November 12, 2018 5:07 PM
To: ibis-editorial@xxxxxxxxxxxxx<mailto:ibis-editorial@xxxxxxxxxxxxx>
Cc: Mirmak, Michael <michael.mirmak@xxxxxxxxx<mailto:michael.mirmak@xxxxxxxxx>>
Subject: RE: [ibis-editorial] IBIS 7.0 Editorial Checklist and Draft 181109
Michael,
Good work.
The new hierarchy diagram in section 3.3 does not appear to have been inserted.
It is missing the Interconnect Model information, the added keywords such as
[Bus Label] and [Die Supply Pads], and .ims file information at the end.
Attached again is a replacement tree diagram.
Bob
From:
ibis-editorial-bounce@xxxxxxxxxxxxx<mailto:ibis-editorial-bounce@xxxxxxxxxxxxx>
[mailto:ibis-editorial-bounce@xxxxxxxxxxxxx] On Behalf Of Mirmak, Michael
Sent: Monday, November 12, 2018 3:14 PM
To: 'ibis-editorial@xxxxxxxxxxxxx'
Subject: [ibis-editorial] IBIS 7.0 Editorial Checklist and Draft 181109
Please find enclosed the November 9 checklist for IBIS 7.0 editorial
activities. The November 9 draft IBIS 7.0 document itself has been posted to
http://ibis.org/editorial_wip/ver7_0_181109.docx. Changes include:
1. All edits discussed and implemented during the meeting.
2. Bob's updated keyword hierarchy table has been added.
3. The Section 3 vs. Section 3.2 references have been fixed (there are 19 in
all related to "Syntax Rules").
4. All captions now use a common format.
5. The indentation for all header levels in the text is left-justified.
6. All caption cross-references have been fixed.
On item (4), one can actually create a table of figures and a table of tables
automatically in Microsoft Word; I did this to check that the formatting,
capitalization, etc. on all the figure and table captions were correct (and had
a lot of fixes to make). However, I deleted the two tables after I was done.
We can discuss in the meeting whether we want to keep them permanently.
Comments on the draft are, as always, welcome and encouraged.
* MM
