Where is "B&K", what's the full name? Was Heavener the guy in Holliston"? So
the fact that the DW is not on the approved roster, does not pose an issue? Or
maybe for some FFLs but not all ? Thanks Tim -----Original Message-----
From: Andrew McDowell <andrewd.mcdowell@xxxxxxxxx>
To: hsa <hsa@xxxxxxxxxxxxx>
Sent: Fri, Mar 15, 2019 8:32 pm
Subject: [hsa] Re: thinking of buying a revolver
Heavner's shop is closed as of last fall so B&K or MFS are good bets for the
xfer. I didn't know if Mark kept his FFL around or if he's xfering now that the
shop is gone.
On Fri, Mar 15, 2019, 8:22 PM Mooney625 Geocacher <mooney625@xxxxxxxxxxx> wrote:
I believe Keith has one of these setups. As your token revolver aficionado...
Droooool.
Those are quite nice.
I’m sure Heavner or MA Firearms school could handle the transfer locally, or 4
Seasons.
I’d *think* about maybe a Smith and Wesson 25-2 in .45 ACP, 6”bbl too-You can
also use for USPSA, and the low recoil of a downloaded .45 with an even heavier
framed gun than the DW makes them extremely soft shooting. The .45, making
bigger holes, is good for scoring ring stretches too.
But those Dan Wesson pistol packs.... yummy.
Gv
On Mar 15, 2019, at 8:11 PM, Tim <dmarc-noreply@xxxxxxxxxxxxx> wrote:
Unlike a lot of you I don't own a lot of guns. I'm considering buying a
revolver for the first time. I'm interested in one primarily for shooting
silhouettes at 75'. My research indicates a quality one for that use would be
a Dan Wesson. Here's a
link:https://danwessonfirearms.com/product/715-revolver/ I'm interested in
getting the 357 magnum pistol pack that comes with a 4", 6" and an 8" barrel. I
like the idea of a long barrel and also like having a 6" and an 8". Considering
possibly trying to buy this from a gun broker
listing:https://www.gunbroker.com/Item/804266136 Here are some questions: What ;
do you think of my choice? Do you have any experience with Dan Wesson revolvers
or comments about? Any comments on using gunbroker.com? Have you bought a
gun through them before? Any suggestion of who to use as an FFL to receive it
and any details related to that? Would I likely need to have the barrels
shipped separately in order to do this? Thanks for any feedback Regards, Tim
