Fine. I am still on 30m for the past 3 days. Lots of data produced and
collected :)
On 02/06/2016 09:52, wkhibbert wrote:
Hi Dieter.
I moved to 40 meters. I copied two stations on very weak ESKIP on 10, but got 4 spots in 12 minutes on 40 meters. The vertical and conditions are much better at 7..04 MHz😆
I will leave the rig on 40 until 1300Z tomorrow to see what the 500 mW will do.
73, Keith, WB2VUO
Sent from my Galaxy Tab® A
-------- Original message --------
From: Dieter Pelz <dpelz@xxxxxxxxxxxxx>
Date: 06/01/2016 16:56 (GMT-05:00)
To: hfbeacons@xxxxxxxxxxxxx
Subject: [HFbeacons] Re: 10 Meter WSPR beacon on the Air
Hi Keith
I'll be on 10m WSPR on Friday (our saturday). The 30dB+ system gain of
WSPR come in handy when condx are the way they are.
73
Dieter, VK3FFB
On 02/06/2016 05:16, wkhibbert@xxxxxxxxxxx wrote:
> Hi, Keith here in Amherst, NY
>
>
> I have the spare rig (F-817) running a 10 meter WSPR beacon right now. SSB center frequency is 28.1246 MHz and the TX carrier is +1500 hz, or 28.1261 MHz. If you have either the WSPR or the WSJT-x sofware, you can read the signal, if not, by ear you might hear the carrier (2 minutes on/2 minutes off starting at :02 after the hour).
>
>
> I dropped Jim, N2NXZ a line, and I am hearing WSPR signals on ESkip today. Give a listen and see if you copy anything.
>
>
> 73, Keith, WB2VUO
> ____________________
>
> The HFbeacons mailing list information: //www.freelists.org/webpage/hfbeacons
____________________
The HFbeacons mailing list information: //www.freelists.org/webpage/hfbeacons