[HUG ] Re: Lens
- From: "Q.G. de Bakker" <qnu@xxxxxxxxxx>
- To: <hasselblad@xxxxxxxxxxxxx>
- Date: Sun, 18 Mar 2012 21:35:02 +0100
You can't (and do not have to) trigger the leaf shutter through the PC terminal.
The shutter that will be used is the one inside the Nikon.
The aperture will be manual stop down.
I have such an adapter (three in fact: one for my - decommissoned - OM cameras,
one for Nikon, and one for Canon), and it works.
Though i rather use lenses made for the camera, including all the auto-features
they offer.
As mentioned, the focal length of any lens you put on it remains what it is.
The FOV equivalent Richard provides is a comparison, and shows what focal
length lens you would have to use on a 35 mm film camera (of full frame 35 mm
DSLR) to get the same field of view. Do not interpret that as meaning that the
60 mm an 80 mm lenses will anything other than 60 mm and 80 mm lenses on DX
format as well.
----- Original Message -----
From: Richard Man
To: hasselblad@xxxxxxxxxxxxx
Sent: Sunday, March 18, 2012 9:23 PM
Subject: [HUG ] Re: Lens
Lens focal length don't change when you change format, so a 60mm lens is
still a 60mm lens. However, the DX sensor is 1.5x
crop/multiplication-factor/whatever-you-want-to-call-it, so they are ~90mm and
~120mm FOV respectively.
You will probably need to trigger the leaf shutter by using the PC terminal.
On Sun, Mar 18, 2012 at 1:19 PM, James <jmswllms@xxxxxxxxxxxxx> wrote:
Hello Everyone I hope this reaches you in great health and finances. I have
been thinking about getting a converter for my Nikon so that I can put my
Hasselblad lens on it. My question is, I have a 60mm and an 80mm lens's what
would be there equivalent be on my Nikon with a DX senser.
--
// richard <http://www.imagecraft.com/>
// icc blog: <http://imagecraft.com/blog/>
// richard's personal photo blog: <http://www.richardmanphoto.com>
[ For technical support on ImageCraft products, please include all previous
replies in your msgs. ]
Other related posts:
