#6039: P3 BX440 boots very slow ca.3min... -----------------------------+---------------------------------------------- Reporter: brunobratwurst | Owner: mmlr Type: bug | Status: assigned Priority: normal | Milestone: R1 Component: Drivers/Disk | Version: R1/alpha2 Resolution: | Keywords: Platform: x86 | Blockedby: Patch: 0 | Blocking: -----------------------------+---------------------------------------------- Comment(by brunobratwurst): Replying to [comment:10 brunobratwurst]: > Replying to [comment:9 brunobratwurst]: > > Replying to [comment:8 brunobratwurst]: > > > Replying to [comment:6 bonefish]: > > > > Replying to [comment:5 bonefish]: > > > > > There are quite a few of these in the syslog: > > > > > {{{ > > > > > 5984 KERN: ata 0 error: device selection timeout > > > > > 5985 KERN: ata 0-0 error: failed to send transfer request > > > > > }}} > > > > > > > > ... which probably belong to /dev/disk/ata/0/master/raw (not the boot disk). Is this disk (250 GB) working correctly in other OSs? > > > > > > >>>Yes there is still Windows XP and one BeOs Max partition there and the hardware has itself no faults... > > >>>> It is a brand new harddisk... > > >>>> Both Windows XP and Beos behaving normal. In BeOs the device control lamp does not remain lit... ah yes the BeOs Max boots fast (relative ca. 30sec) it is a P3 400Mhz celeron. on a slot 1 mainboard. >>>>>I just checked out the boottime of BeOs Max and it is hanging too on the 4th and the 5th icon. Befor and after it boots very fast... takes appx. 1min to boot... and hd-control lamp is working ok... Haiku "hangs" appx. 2 min on 4th icon and then proceed very fast... hope that helps... -- Ticket URL: <http://dev.haiku-os.org/ticket/6039#comment:11> Haiku <http://dev.haiku-os.org> Haiku - the operating system.