[haiku-bugs] Re: [Haiku] #6039: P3 BX440 boots very slow ca.3min...
- From: "brunobratwurst" <trac@xxxxxxxxxxxx>
- Date: Fri, 21 May 2010 12:33:52 -0000
#6039: P3 BX440 boots very slow ca.3min...
-----------------------------+----------------------------------------------
Reporter: brunobratwurst | Owner: mmlr
Type: bug | Status: assigned
Priority: normal | Milestone: R1
Component: Drivers/Disk | Version: R1/alpha2
Resolution: | Keywords:
Platform: x86 | Blockedby:
Patch: 0 | Blocking:
-----------------------------+----------------------------------------------
Comment(by brunobratwurst):
Replying to [comment:9 brunobratwurst]:
> Replying to [comment:8 brunobratwurst]:
> > Replying to [comment:6 bonefish]:
> > > Replying to [comment:5 bonefish]:
> > > > There are quite a few of these in the syslog:
> > > > {{{
> > > > 5984 KERN: ata 0 error: device selection timeout
> > > > 5985 KERN: ata 0-0 error: failed to send transfer request
> > > > }}}
> > >
> > > ... which probably belong to /dev/disk/ata/0/master/raw (not the
boot disk). Is this disk (250 GB) working correctly in other OSs?
> >
> > >>>Yes there is still Windows XP and one BeOs Max partition there and
the hardware has itself no faults...
> >>>> It is a brand new harddisk...
> >>>> Both Windows XP and Beos behaving normal. In BeOs the device
control lamp does not remain lit... ah yes the BeOs Max boots fast
(relative ca. 30sec) it is a P3 400Mhz celeron. on a slot 1 mainboard.
--
Ticket URL: <http://dev.haiku-os.org/ticket/6039#comment:10>
Haiku <http://dev.haiku-os.org>
Haiku - the operating system.
Other related posts:
