[haiku-bugs] Re: [Haiku] #18076: USB Boot hangs on FUJITSU AMILO LI 1720 laptop - possibly as chipset is ATI (AMD) ?
- From: "Haiku" <trac@xxxxxxxxxxxx>
- To: undisclosed-recipients: ;
- Date: Wed, 25 Jan 2023 08:02:19 -0000
#18076: USB Boot hangs on FUJITSU AMILO LI 1720 laptop - possibly as chipset is
ATI
(AMD) ?
---------------------------+-----------------------------------------------
Reporter: | Owner: nobody
KitsunePrefecture |
Type: bug | Status: new
Priority: normal | Milestone: Unscheduled
Component: | Version: R1/beta4
Drivers/Disk/ATA |
Resolution: | Keywords: USB boot hangs ATI (AMD) chipset
Blocked By: | Blocking:
Platform: x86 |
---------------------------+-----------------------------------------------
Comment (by KitsunePrefecture):
Replying to [comment:23 korli]:
KitsunePrefecture, have you tried blacklisting the radeon and ohci
driver while booting off USB 2.0?
Dear korli,
Unfortunately not possible, just as I wrote :
boot from USB stucks at POST when USB devices would come, they never
appear in devicelist until install thumbdrive removed and rebooted without
it.
It is only Haiku related -
Windows7 USB installer works and I could install it several versions at
different times from that - however that is on an SD card in an older USB
SD card reader even.
Also Linux Live image worked till boot menu appeared and started Live as
well - it was another problem with it - a known bug - that I experienced
with several distros and it is memory stuff not USB.
I wrote Haiku image onto 128 GB SD card, 16 GB SD card, and 2 GB SD
card, and used 2 different USB SD card reader - one that boots
successfully with Windows SD card as well. And another more modern. Also
tried out a combined card reader that supports more cards not only SD
cards - it had caused stucks at boot.
I then deleted and used a direct USB thumbdrive - the same result and
only with Haiku, as previously Linux Live image worked as I described
above - so no stucking effect, but some other probklem, if I remember well
some memory issue, that was not memory module error.
I can boot Haiku via IDE/PATA built-in CD/DVD drive only - I reach
bootloader only in that way.
Built-in Ricoh SD card reader does not appear in BIOS boot options, I
thought it maybe the available PCI device - but even when it was
added/selected as first device - there were no boot happened at all then,
so it skipped till USB or IDE devices found with startable OS.
Via optical drive boot I of course can select boot options - I had to
use safe graphics mode to reach desktop - as NorthBridge Radeon does not
work well - I wrote how distorted and not readable screen appears if boot
finishes normally without any boot option used.
From USB the boot process stucks - never ending at BIOS POST.
--
Ticket URL: <
https://dev.haiku-os.org/ticket/18076#comment:24>
Haiku <
https://dev.haiku-os.org>
The Haiku operating system.
Other related posts:
