#18076: USB Boot hangs on FUJITSU AMILO LI 1720 laptop - possibly as chipset is
ATI
(AMD) ?
---------------------------+-----------------------------------------------
Reporter: | Owner: nobody
KitsunePrefecture |
Type: bug | Status: new
Priority: normal | Milestone: Unscheduled
Component: | Version: R1/beta4
Drivers/Disk/ATA |
Resolution: | Keywords: USB boot hangs ATI (AMD) chipset
Blocked By: | Blocking:
Platform: x86 |
---------------------------+-----------------------------------------------
Comment (by KitsunePrefecture):
Hello,
So I wrote R1/Beta4 32 bit image onto DVD+RW disc and tried out just as
Haiku forum member zuMI ( here tzu_mi ) wrote to me earlier.
It had not worked until I had not selected safe boot option :
--> safe graphics driver.
At debug options I selected
--> on-screen debug output,
--> disable paging.
Meanwhile boot concluded earlier all icons on splash colored, but desktop
had not appeared but a "textile" screen : nothing readable but white/gray
sea with colour spots, lines just as when a digital broadcast fall apart
or a coded channel on a TV.
After I could reach the desktop, I plugged in a USB thumb drive and
nothing happened, it had not appeared on the desktop or at Deskbar -->
Mounting applet.
I chosen "Lemezkezelő", so the partition manager app, it had not show the
plugged device not even using refresh.
I did it as during the boot process I've seen many USB EHCI error
messages.
I opened a terminal and as waddlesplash taught to me I issued `listusb`
command :
Welcome to the Haiku shell.
~> listusb
0000:0000 /dev/bus/usb/0/hub "HAIKU Inc." "OHCI RootHub" ver. 0110
0000:0000 /dev/bus/usb/1/hub "HAIKU Inc." "OHCI RootHub" ver. 0110
0000:0000 /dev/bus/usb/2/hub "HAIKU Inc." "EHCI RootHub" ver. 0200
~> listusb -v
[Device /dev/bus/usb/0/hub]
Class .................. 0x09 (Hub (Unused, Full speed (or root) hub))
Subclass ............... 0x00Hub (Unused, Full speed (or root) hub)
Protocol ............... 0x00Hub (Unused, Full speed (or root) hub)
Max Endpoint 0 Packet .. 64
USB Version ............ 1.16
Vendor ID .............. 0x0000
Product ID ............. 0x0000
Product Version ........ 0x0110
Manufacturer String .... "HAIKU Inc."
Product String ......... "OHCI RootHub"
Serial Number .......... ""
[Configuration 0]
Configuration String . ""
[Interface 0]
[Alternate 0 active]
Class .............. 0x09 (Hub (Unused, Full speed (or
root) hub))
Subclass ........... 0x00Hub (Unused, Full speed (or root)
hub)
Protocol ........... 0x00Hub (Unused, Full speed (or root)
hub)
Interface String ... ""
[Endpoint 0]
MaxPacketSize .... 8
Interval ......... 255
Type ............. Interrupt
Direction ........ Input
[Descriptor 0]
Type ............. 0x29
Data ............. 04 00 00 00 00 00 ff
Hub ports count......... 4
Hub Controller Current.. 0mA
Port 1 status....... 0100.0000 Power
Port 2 status....... 0100.0000 Power
Port 3 status....... 0100.0000 Power
Port 4 status....... 0100.0000 Power
[Device /dev/bus/usb/1/hub]
Class .................. 0x09 (Hub (Unused, Full speed (or root) hub))
Subclass ............... 0x00Hub (Unused, Full speed (or root) hub)
Protocol ............... 0x00Hub (Unused, Full speed (or root) hub)
Max Endpoint 0 Packet .. 64
USB Version ............ 1.16
Vendor ID .............. 0x0000
Product ID ............. 0x0000
Product Version ........ 0x0110
Manufacturer String .... "HAIKU Inc."
Product String ......... "OHCI RootHub"
Serial Number .......... ""
[Configuration 0]
Configuration String . ""
[Interface 0]
[Alternate 0 active]
Class .............. 0x09 (Hub (Unused, Full speed (or
root) hub))
Subclass ........... 0x00Hub (Unused, Full speed (or root)
hub)
Protocol ........... 0x00Hub (Unused, Full speed (or root)
hub)
Interface String ... ""
[Endpoint 0]
MaxPacketSize .... 8
Interval ......... 255
Type ............. Interrupt
Direction ........ Input
[Descriptor 0]
Type ............. 0x29
Data ............. 04 00 00 00 00 00 ff
Hub ports count......... 4
Hub Controller Current.. 0mA
Port 1 status....... 0100.0000 Power
Port 2 status....... 0100.0000 Power
Port 3 status....... 0100.0000 Power
Port 4 status....... 0100.0000 Power
[Device /dev/bus/usb/2/hub]
Class .................. 0x09 (Hub (Unused, Full speed (or root) hub))
Subclass ............... 0x00Hub (Unused, Full speed (or root) hub)
Protocol ............... 0x00Hub (Unused, Full speed (or root) hub)
Max Endpoint 0 Packet .. 64
USB Version ............ 2.0
Vendor ID .............. 0x0000
Product ID ............. 0x0000
Product Version ........ 0x0200
Manufacturer String .... "HAIKU Inc."
Product String ......... "EHCI RootHub"
Serial Number .......... ""
[Configuration 0]
Configuration String . ""
[Interface 0]
[Alternate 0 active]
Class .............. 0x09 (Hub (Unused, Full speed (or
root) hub))
Subclass ........... 0x00Hub (Unused, Full speed (or root)
hub)
Protocol ........... 0x00Hub (Unused, Full speed (or root)
hub)
Interface String ... ""
[Endpoint 0]
MaxPacketSize .... 8
Interval ......... 255
Type ............. Interrupt
Direction ........ Input
[Descriptor 0]
Type ............. 0x29
Data ............. 08 00 00 00 00 00 ff
Hub ports count......... 8
Hub Controller Current.. 0mA
Port 1 status....... 0100.0000 Power
Port 2 status....... 0503.0000 Connect Enable Power
Port 3 status....... 0100.0000 Power
Port 4 status....... 0101.0000 Connect Power
Port 5 status....... 0100.0000 Power
Port 6 status....... 0100.0000 Power
Port 7 status....... 0100.0000 Power
Port 8 status....... 0100.0000 Power
~>
~>
As you can see - only hubs are presented not any device, however I had
plugged in 2 Logitec Unifying device to attach wireless mouse and keyboard
of Logitech.
I assume this could prevent to boot Haiku from a USB thumb drive.
--
Ticket URL: <https://dev.haiku-os.org/ticket/18076#comment:14>
Haiku <https://dev.haiku-os.org>
The Haiku operating system.