#16586: XHCI: "Divide Error Exception" in SubmitNormalRequest
-------------------------------+----------------------------
Reporter: Lindenov | Owner: waddlesplash
Type: bug | Status: new
Priority: normal | Milestone: Unscheduled
Component: Drivers/USB/XHCI | Version: R1/Development
Resolution: | Keywords:
Blocked By: | Blocking:
Platform: All |
-------------------------------+----------------------------
Description changed by Lindenov:
Old description:
Usually I booted Haiku on my SSD with a second system installed on a
flash drive. I've always did it on a legacy mode, because I have some
framebuffer error on UEFI with enabled CSM. But it's not about that.
I turned CSM off and tried to boot Haiku with flash drive, like I usually
do, but in UEFI-mode now. So I've got 2 KDLs. The first one is when I've
tried to boot Haiku that installed on SSD. The second one is when I've
tried another Haiku, on that flash drive.
I remember, that back in a january I've met with the same problem, but it
was not only about UEFI booting, but legacy-mode booting as well. I've
disabled xHCI in my BIOS settings then and did not meet those KDLs again.
The legacy-mode booting was fixed in february, so I've enabled it again.
Now I don't use legacy-mode booting anymode and I've met this trouble
again.
In attached files, the first one is both KDLs, the second one is for
Haiku on SSD, the third is for Haiku on flash. hrev is 54679