#16586: xHCI error on UEFI booting
------------------------------+-----------------------------
Reporter: Lindenov | Owner: waddlesplash
Type: bug | Status: new
Priority: high | Milestone: Unscheduled
Component: Drivers/USB/XHCI | Version: R1/Development
Keywords: | Blocked By:
Blocking: | Platform: x86-64
------------------------------+-----------------------------
Usually I booted Haiku on my SSD with a second system installed on a flash
drive. I've always did it on a legacy mode, because I have some
framebuffer error on UEFI with enabled CSM. But it's not about that.
I turned CSM off and tried to boot Haiku with flash drive, like I usually
do, but in UEFI-mode now. So I've got 2 KDLs. The first one is when I've
tried to boot Haiku that installed on SSD. The second one is when I've
tried another Haiku, on that flash drive.
I remember, that back in a january I've met with the same problem, but it
was not only about UEFI booting, but legacy-mode booting as well. I've
disabled xHCI in my BIOS settings then and did not meet those KDLs again.
The legacy-mode booting was fixed in february, so I've enabled it again.
Now I don't use legacy-mode booting anymode and I've met this trouble
again.
In attached files, the first one is for Haiku on SSD, the second is for
Haiku on flash. hrev is 54679
--
Ticket URL: <https://dev.haiku-os.org/ticket/16586>
Haiku <https://dev.haiku-os.org>
The Haiku operating system.