As makers, we often need a board in a hurry, such as the night before
MakerFaire :-)
A lot of my maker projects use milled PCB boards. If the design doesn’t need a
2 sided board with 8 mil traces, I will almost always use a board I milled at
HackPGH. Many of my projects use them.
- Bob
On Nov 22, 2016, at 7:51 PM, Matthew Beckler <matthew.beckler@xxxxxxxxx>
wrote:
I understand the desire to mill your own PCB, but if it's a board you want to
use in a real application (not just testing footprints or layouts) I would
strong suggest using a real fab.
