I am connecting it to a serial port directly. I am using WinDisk 3.5, which, according to FS instructions, is supposed to work with this particular unit and upgrade. Hope they have good luck selling me a PacMate. I'd love to have one, but they don't give those away <smile>! Keith ----- Original Message ----- From: "Laura Eaves" <leaves1@xxxxxxxxxxxxxxx> To: <guispeak@xxxxxxxxxxxxx> Sent: Saturday, January 22, 2005 10:40 PM Subject: [guispeak] Re: Braille Lite 2000 and WinDisk > Are you connected to a serial port or a USB to serial adaptor? > Shouldn't matter -- I've had good luck with the adaptors, but have never > run windisk over it. > Does the windisk on your notetaker match the version on your PC? > Are you on XP or an earlier version of windows? > I know that windisk 3.0 did not run on XP, but 3.5 may have fixed that. > Also, I had trouble using windisk on ME and discovered that there were > reasons why some software made it incompatible, and so its behavior was > unpredictable. Don't know the details however. > Perhaps whatever it was was fixed in 3.5... > Try calling FS and see what they say. (Well, actually they will probably > try and sell you a pack mate...<smily>) > Good luck. > --le > > ----- Original Message ----- > From: "Keith Bundy" <okb@xxxxxxxxxxxxx> > To: <guispeak@xxxxxxxxxxxxx> > Sent: Saturday, January 22, 2005 11:31 PM > Subject: [guispeak] Re: Braille Lite 2000 and WinDisk > > > Thanks, Laura. I've done that, and I still get the message, "Cannot Access > Note Taker." I am beginning to wonder if I might have a faulty cable. > Everything seems connected quite securely, but nothing is working. > > Keith > ----- Original Message ----- > From: "Laura Eaves" <leaves1@xxxxxxxxxxxxxxx> > To: <guispeak@xxxxxxxxxxxxx> > Sent: Saturday, January 22, 2005 10:00 PM > Subject: [guispeak] Re: Braille Lite 2000 and WinDisk > > > > Hi Keith -- > > You need to start windisk on both the PC and on the braille lite > > Go to the options menu and find the option -- I think it's way down at the > > end, but I can't remember the quick key to get to it -- either w or > w-chord. > > Then you can see both the braille lite file system and the PC current > folder > > on your PC. > > Good luck. > > --le > > > > ----- Original Message ----- > > From: "Keith Bundy" <okb@xxxxxxxxxxxxx> > > To: <guispeak@xxxxxxxxxxxxx>; <vicug-l@xxxxxxxxxxxxxxxxxxxxx> > > Sent: Saturday, January 22, 2005 6:28 PM > > Subject: [guispeak] Braille Lite 2000 and WinDisk > > > > > > I recently purchased a Braille Lite 2000. It has the latest update, and I > > am trying to run Windisk 3.5 with it in order to transfer some files. > When > > I try to run WinDisk, I get the message that the note taker cannot be > > detected. > > > > I really need to transfer some files this evening, if possible. If anyone > > has a clue as to what I might do, feel free to email off-list, as I know > > this is a bit off-topic. > > > > FYI, I have the serial port on, half-duplex, 8 stop bits, 1 data bit, no > > parity, and software handshaking set in my braille Lite, and I am running > it > > with Windows XP Home Edition. > > > > Thanks for any help you may be able to give me. > > > > > > Keith Bundy > > 605-480-0976 > > okb@xxxxxxxxxxxxx > > > > > > > > -- > > No virus found in this outgoing message. > > Checked by AVG Anti-Virus. > > Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/2005 > > > > ** To leave the list, click on the immediately-following link:- > > ** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=unsubscribe] > > ** If this link doesn't work then send a message to: > > ** guispeak-request@xxxxxxxxxxxxx > > ** and in the Subject line type > > ** unsubscribe > > ** For other list commands such as vacation mode, click on the > > ** immediately-following link:- > > ** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=faq] > > ** or send a message, to > > ** guispeak-request@xxxxxxxxxxxxx with the Subject:- faq > > > > ** To leave the list, click on the immediately-following link:- > > ** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=unsubscribe] > > ** If this link doesn't work then send a message to: > > ** guispeak-request@xxxxxxxxxxxxx > > ** and in the Subject line type > > ** unsubscribe > > ** For other list commands such as vacation mode, click on the > > ** immediately-following link:- > > ** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=faq] > > ** or send a message, to > > ** guispeak-request@xxxxxxxxxxxxx with the Subject:- faq > > > > > > > > -- > > No virus found in this incoming message. > > Checked by AVG Anti-Virus. > > Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/2005 > > > > > > > > -- > No virus found in this outgoing message. > Checked by AVG Anti-Virus. > Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/2005 > > ** To leave the list, click on the immediately-following link:- > ** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** guispeak-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** guispeak-request@xxxxxxxxxxxxx with the Subject:- faq > > ** To leave the list, click on the immediately-following link:- > ** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** guispeak-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** guispeak-request@xxxxxxxxxxxxx with the Subject:- faq > > > > -- > No virus found in this incoming message. > Checked by AVG Anti-Virus. > Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/2005 > > -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/2005 ** To leave the list, click on the immediately-following link:- ** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** guispeak-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** guispeak-request@xxxxxxxxxxxxx with the Subject:- faq