Just use a normal usb cable that you would connect from your PC to the receiver.
The port you are looking for is on the bottom edge of the unit, to the left of the 30 pin apple connecter. To the right of the apple connecter is the status button. The little cable on the left side is a micro usb and the cable on the right side is to connect the MyCharge to a computer to charge the MyCharge through a computers USB port.
You don't need any special adapter. On 3/31/2013 8:52 PM, Paul Bolduc wrote:
Good evening, My unit arrived Saturday afternoon and I finally got a friend to go over the booklet looking at the connectors informing me I needed adapters. Can anybody inform me as to where an adapter for plugging on to the standard USB to a male mini USB can be found? The mini USB would be used on devices with the same jack as the 747 Pro GPS receiver. The other connector would be to go from the plug at the inside end of the long cable which I think is for a cell phone, maybe, but would also look for that to a mini USB male plug. It does seem to be a nice compact unit, but no good if I can't plug in my devices. Happy Easter to all, Have a great day, Paul Bolduc Amateur Radio Operator: WR1X also M0CHG Email: <mailto:WR1X@xxxxxxxx> WR1X@xxxxxxxx Alternate Email: <mailto:pcbolduc@xxxxxxxxxxx> pcbolduc@xxxxxxxxxxx Located in the only town named Royalston in North America and maybe even the world. Royalston is located in North Central Massachusetts
To change your email settings (unsubscribe, digest only, or vacation mode): http://senderogroup.com/social_media/email.htm Additionally, to unsubscribe send an email to gps-talkusers-request@xxxxxxxxxxxxx with "unsubscribe" in the Subject.
