Hello, Bob A., Just so you know, the right spelling is: S e n d e r o. And you could go to their website for purchasing of the version 3 at: www.senderogroup.com BTW, I have seen you on Braillenote list before, but I am no longer there for good. Smile. Todd > ----- Original Message ----- >From: "Robert Acosta" <boacosta@xxxxxxxxxxx >To: <gps-talkusers@xxxxxxxxxxxxx >Date: Sun, 18 Jul 2004 07:24:23 -0700 >Subject: [gps-talkusers] Re: Challenge Loading V3 Upgrade >Hi Don, >Where can i get the version 3 of the Gps? Do i go to Cindero and buy it or >something. I like my current version and must decide whether to move >forward on this. Hope you guys are having a great summer. >Bob and arlo >----- Original Message ----- >From: "Don Bishop" <w6smb@xxxxxxxxxxxxx >To: <gps-talkusers@xxxxxxxxxxxxx >Sent: Saturday, July 17, 2004 10:20 PM >Subject: [gps-talkusers] Re: Challenge Loading V3 Upgrade >> Hi, >>Not sure if these were typing errors or actual descriptions of what you >did, but hopefully this will give you some clues. >>You say you moved the v3 exe file to the root of the bn drive. Do you >mean the flash disk? I can't recall the exact file name of the .exe file >off the top of my >>head, but it's the one on the one cd which isn't in a pocket of the book o >cd's constituting the gps maps. >>You later say you pressed a for applications and went to the compact flash >card. If you actually did copy the v3.exe file to your root of the flash >disk, you >>should actually have gone there instead of to the flash card. >>Finally, from your description, it almost sounds like you actually tried >to run another file rather than the v3 timed exe. >> I hope this can help you out. >>Don >>On Sat, 17 Jul 2004 21:47:25 -0700, Rich Irwin wrote: >>Can someone help me out. I have followed what I understand to be the >>instructions to install the V3 upgrade and continually run into the same >>obstacle no matter how I approach the installation. >>1. I have replaced all maps, poi's, and doc's with those from the new >CD's. >>2. I have copied the v3.exe file to the root of the cf drive. >>3. I have done a reset with "fds" and waited until the BN announced "main >>menu". Contrary to the instructions in the v3 readme, there was only one >>set of chimes, not two. >>4. I then pressed "u" for utilities. >>5. I then pressed "a" and it said "run program from what drive?" >>6. I pressed "c" for compact flash. It then responded with "directory >name? >>Press enter for /." >>7. I pressed "enter". It responded with "program name? Press enter for >>braillenotetimed.exe". >>8. I pressed "enter" and it responded with "command line?" >>9. Again, I pressed "enter" It responded with "Welcome to . . . Press >enter >>to start installation or esc to cancel. >>10. I pressed "enter" and it almost immediately responds with >"gpstalk.dll >>The process cannot access the file because it is being used by another >>process. Could not not install gpstalk.dll The process cannot access the >>file because it is being used by another process. To exit press enter." >>Where do I go from here? How do I get past this message or what am I >doing >>wrong? >>Rich Irwin >>rich.irwin@xxxxxxxxxxx