I have the Braille Note at 32 cells.
Debra
On 10/17/15, Bill <billlist1@xxxxxxxxxxx> wrote:
Also, if you change a value in the Embosser Setup dialog, remember to tab** To leave the list, click on the immediately-following link:-
to
Save as Defaults
And press space bar.
To open Embosser Setup:
Run GoodFeel
ALT+O for Options
Arrow down to Embosser Setup or type the letter E
Change
Characters per Line
From: goodfeel-bounce@xxxxxxxxxxxxx [mailto:goodfeel-bounce@xxxxxxxxxxxxx]
On Behalf Of albertm13@xxxxxxxx
Sent: Saturday, October 17, 2015 6:46 AM
To: goodfeel@xxxxxxxxxxxxx
Subject: [goodfeel] Re: hello
Hi,
I'm not sure what's happening but is it possible that GOODFEEL just needs
to
make longer lines? Try increasing Characters per line in GOODFEEL's
Embosser Setup dialog to something that would fit more measures but you
will
probably have to reduce this value if you want to braille onto paper.
Albert
---------- Original Message ----------
From: Debra Baxley <debrabaxley330@xxxxxxxxx>
To: goodfeel@xxxxxxxxxxxxx
Cc: debrabaxley330 <debrabaxley330@xxxxxxxxx>
Subject: [goodfeel] hello
Date: Fri, 16 Oct 2015 17:21:37 -0500
I am not new to the list. How do I get Goodfeel 3.2 to read more than
four measures on a Braille Note M-Power using the terminal for screen
reader with JAWS 16 and Windows 8.1? Thank you.
Debra
p>
____________________________________________________________
<http://thirdpartyoffers.juno.com/TGL3132/5622271b20eda271a734fst01duc> A
Balance Transfer Card With An Outrageously Long Intro Rate And No Balance
Transfer Fees That Can Save You Thousands
http://www.nextadvisor.com/blog/2015/01/02/chase-slate-best-bet-for-balance-
transfers/?kw=grav_dsk_brill-100-19
