Hi Anne:
Douk here. May I ask where in Africa? I am in Morocco.
Douk
----- Original Message -----
From: "Anne-Sophie DOUDARD" <annesophie.doudard@xxxxxxx>
To: <goodfeel@xxxxxxxxxxxxx>
Sent: Saturday, September 20, 2008 7:57 PM
Subject: [goodfeel] Re: Embosser Setup for GOODFEEL 3
Hi Bill!
I have found the embosser problem. It was an USB error. Now, Godfeel and
the
embosser work together.
Concerning your french lessons, I have to go in Africa next week. I'll go
bach on monday the 29th. We'll schedule a time after that.
Thanks alot for your help!!!
Bonne soirée!!
Anne-So
----- Message d'origine -----
De : "Dancing Dots" <billlist1@xxxxxxxxxxx>
A : <goodfeel@xxxxxxxxxxxxx>
Cc : <support@xxxxxxxxxxxxxxx>
Envoyé : jeudi 18 septembre 2008 13:28
Objet : [goodfeel] Re: Embosser Setup for GOODFEEL 3
Dear Anne-Sophie,
OK, here is something to try. If this does not work, please E-mail to
support@xxxxxxxxxxxxxxx and Bryan Smart or someone else from Dancing Dots
will make an appointment with you to talk over Skype. I leave soon for
some
business in New York so I won't be able to contact you myself via Skype
over
the next couple of days. It will probably be after 18:00 hours Paris
time.
Close everything.
Run GOODFEEL.
ALT+O, E for Embosser Setup
Tab 4 times and make certain that the Generic/Text-only driver is
selected.
OK, I think you have probably already completed these steps. Now I am
beginning to think that the hardware connection from the PC to the
embosser
needs to be checked. Also, the internal settings of the embosser may
need
to be changed unless you are able to emboss from other braille software
such
as Duxbury. If the embosser never works, check to make sure that it is
set
to send information to the port being used. For example, parallel port
or
serial port or USB port.
I will contact you off-list about scheduling my French lessons. Sorry
about
that!
Regards,
Bill
Bill McCann
Founder and President of Dancing Dots since 1992
www.DancingDots.com
Tel: [001] 610-783-6692
-----Original Message-----
From: goodfeel-bounce@xxxxxxxxxxxxx
[mailto:goodfeel-bounce@xxxxxxxxxxxxx]
On Behalf Of Anne-Sophie DOUDARD
Sent: Thursday, September 18, 2008 4:28 AM
To: goodfeel@xxxxxxxxxxxxx
Subject: [goodfeel] Re: Embosser Setup for GOODFEEL 3
Hi Bill!
Oh I'm very sorry but my embosser doesn't work again. I have installed
the
Generic Text Only but when I press the Embosser btn, nothing hapens. Can
you
help me?
I have a second question for you, about the French lesson: You have
forgot
the firs lesson on tuesday the 9 of september. Give me a moment, at night
for me, when I can give it to you!
A tout a l'heure!
----- Message d'origine -----
De : "Dancing Dots" <billlist1@xxxxxxxxxxx> A : <goodfeel@xxxxxxxxxxxxx>
Envoyé : mardi 16 septembre 2008 17:21 Objet : [goodfeel] Embosser Setup
for
GOODFEEL 3
Hi,
OK, to set up your embosser:
Run GOODFEEL.
Options | Embosser Setup
Tab 3 times and make sure your Embosser Device is set to "Windows
Printer".
Tab once more and find Generic/Text-only printer in the list. If you do
not
find that driver, try any driver that looks like it is the name of an
embosser. If you don't find anything that works, you must add a Generic
Text-only printer using Control Panel | Printers and Faxes | Add Printer.
Whenever you make changes in this embosser setup dialog, do not forget to
choose "Save as Defaults" to preserve your changes for the next time you
run
GOODFEEL.
For important information, see Page 105 of the GOODFEEL manual. You can
find it by going to Start | GOODFEEL | GOODFEEL manual in MS Word.
Regards,
Bill
Bill McCann
Founder and President of Dancing Dots since 1992
www.DancingDots.com
Tel: [001] 610-783-6692
-----Original Message-----
From: goodfeel-bounce@xxxxxxxxxxxxx
[mailto:goodfeel-bounce@xxxxxxxxxxxxx]
On Behalf Of Anne-Sophie DOUDARD
Sent: Tuesday, September 16, 2008 11:06 AM
To: goodfeel@xxxxxxxxxxxxx
Subject: [goodfeel] Re: Scanning score
Thanks for your help.
Now, I have an other problem: my embosser doesn't want to work. I press
the
btn process, I press the btn embosser but nothint happens. What can I do!
SOS!!!!!!!!!
----- Message d'origine -----
De : HYPERLINK "mailto:billlist1@xxxxxxxxxxx"Dancing Dots Ŕ : HYPERLINK
"mailto:goodfeel@xxxxxxxxxxxxx"goodfeel@xxxxxxxxxxxxx
Envoyé : mardi 16 septembre 2008 15:43
Objet : [goodfeel] Re: Scanning score
Dear Anne-Sophie,
It is also important to remember to check or uncheck a box that says
"Read
Lyrics" before scanning any music.
1. Run SharpEye.
2. Press CONTROL+TAB or CONTROL+F4 to close the Image Window.
3. ALT+O for Options; arrow down to Text Recognition Options and press
ENTER.
4. Tab a few times until you reach the "Read Lyrics" field.
5. Press SPACE to check or uncheck this box depending on whether your
music
has lyrics or not, tab to OK and press SPACE.
I hope that this information is helpful.
GOODFEEL will issue those warnings about "Suspicious amount of lyrics"
whenever there are too many notes and not enough words or syllables. If
there are slurs or ties missing in the music or if certain lyrics are not
properly hyphenated, errors will result. If the errors are not too
severe,
you can use the Lime editor to correct them. For example, if a note is
missing a slur or a tie:
1. Move to the note that requires the slur or tie.
2. Make certain that you are not in Note Entry Mode by pressing the
letter
N. (Press CONTROL+N to toggle Note Entry Mode on or off.)
3. Type a 0 to add a slur or type the number 9 to add a tie.
If a syllable is missing a dash:
1. move to the syllable to be edited using ALT+LEFT ARROW or ALT+RIGHT
ARROW.
2. Press ENTER to edit the syllable.
3. Press LEFT arrow to move back through the letters of the syllable to
make sure that the cursor is positioned just after the final letter of
the
syllable.
4. Type a dash.
5. Press the ESCAPE key to exit the edit field.
HTH,
Bill
Bill McCann
Founder and President of Dancing Dots since 1992 www.DancingDots.com
Tel: [001] 610-783-6692
_____
From: goodfeel-bounce@xxxxxxxxxxxxx
[mailto:goodfeel-bounce@xxxxxxxxxxxxx]
On Behalf Of Anne-Sophie DOUDARD
Sent: Tuesday, September 16, 2008 6:11 AM
To: goodfeel@xxxxxxxxxxxxx
Subject: [goodfeel] Scanning score
Hi everybody
I have a question about scanning score with lyrics: I have a choral score
scanned and I want to translate it in brail but, when I launch Goodfeel,
I
have so mutch warning errors. It considers that lyrics are suspicious.
How
can I do?
Thank for your help
No virus found in this incoming message.
Checked by AVG.
Version: 7.5.516 / Virus Database: 270.6.21/1672 - Release Date:
9/15/2008
9:21 AM
No virus found in this outgoing message.
Checked by AVG.
Version: 7.5.516 / Virus Database: 270.6.21/1674 - Release Date:
9/16/2008
8:15 AM
No virus found in this incoming message.
Checked by AVG.
Version: 7.5.516 / Virus Database: 270.6.21/1674 - Release Date:
9/16/2008
8:15 AM
No virus found in this outgoing message.
Checked by AVG.
Version: 7.5.516 / Virus Database: 270.6.21/1674 - Release Date:
9/16/2008
8:15 AM
** To leave the list, click on the immediately-following link:-
** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=subscribe]
** If this link doesn't work then send a message to:
** goodfeel-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:goodfeel-request@xxxxxxxxxxxxx?subjectúq]
** or send a message, to
** goodfeel-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** goodfeel-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** goodfeel-request@xxxxxxxxxxxxx with the Subject:- faq
No virus found in this incoming message.
Checked by AVG.
Version: 7.5.516 / Virus Database: 270.6.21/1676 - Release Date:
9/17/2008
9:33 AM
No virus found in this outgoing message.
Checked by AVG.
Version: 7.5.516 / Virus Database: 270.6.21/1676 - Release Date:
9/17/2008
9:33 AM
** To leave the list, click on the immediately-following link:-
** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=subscribe]
** If this link doesn't work then send a message to:
** goodfeel-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:goodfeel-request@xxxxxxxxxxxxx?subjectúq]
** or send a message, to
** goodfeel-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** goodfeel-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** goodfeel-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** goodfeel-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** goodfeel-request@xxxxxxxxxxxxx with the Subject:- faq
