[geocentrism] Re: Sphere movement

  • From: "philip madsen" <pma15027@xxxxxxxxxxxxxx>
  • To: <geocentrism@xxxxxxxxxxxxx>
  • Date: Sat, 17 Nov 2007 12:08:40 +1000

My answers inserted. I think I had no problem following a simple diagram like 
that. I hope so anyway. 
I would prefer the point P be a spot having some dimension for clarity and 
reality. A point has no dimension.  
Philip. 
  ----- Original Message ----- 
  From: Neville Jones 
  To: geocentrism@xxxxxxxxxxxxx 
  Sent: Saturday, November 17, 2007 7:51 AM
  Subject: [geocentrism] Sphere movement


  Regner, Philip and Paul,

  Take a look at the latest diagram attached.

  Take any non-polar point, P, on the surface of a sphere. Assume that the 
sphere is small and that it rotates about the axis AB. Sample the point P at 1 
minute intervals, where the sphere takes 1436 minutes to rotate once around AB. 
Does P rotate about AB following the path indicated by arrow 1?
  It rotates by translation around AB  and if attached to the sphere which 
seems to be indicated , it also spins on itself one rev per translated 
rotation. 
  Now assume the sphere to be bigger and to rotate once every 365 days about 
axis CD. Sample the position of P every day. Does P rotate about CD following 
the path indicated by arrow 2 ? (Notice that this is a different sphere.)
  Yes, if P is fixed to the sphere which seems to be indicated, like a bead on 
a string, it will rotate by translation one revolution per year, around CD and 
it will make one spin on its own axis per year parallel to CD. which on scale 
can be called the same as a spin around CD
  Take any dot on the diagram to be P and rotate the sphere (of either 
dimension, large or small) about either axis. Does P rotate about the 
particular rotation axis?
  So long as the dot P is a fixed point point on the sphere it will show a spin 
oround its own axis and thus a spin around the main axis due to translation. 
YES agreed..  this has always been acknowledged. 

  Finally, take P to be successive dots from left to right around the path 
given by rotation 1 (which is effectively rotating P's position around AB) on a 
tiny sphere which becomes the size of a dot on the larger sphere, and rotate 
this larger sphere about CD at 1 revolution per 365 days. Sample at 1 day 
intervals.
  In this case, is P rotating about AB whilst simultaneously rotating about the 
axis CD  ?

  Yes I accept that providing as before in the above descriptions the point is 
fixed to the sphere or orbit of travel. in which case if P was a sphere , which 
I know you are simulating, it would act like the moon orbiting the earth. It 
would have one spin, and thus fulfill your requirement of one spin in 365 days. 
 
  However this is not the case with the earth translating around the sun. The 
gyroscopic stabilising influence of the worlds daily spin in HC mode disengages 
the point from the sphere causing it to counter the spin such translation would 
like to make. This is why I made certain it was understood, that which you did 
not postulate but which was assumed, and that is that in your examples the spin 
would only occur if the point was fixed and held in position on the sphere. In 
the space environment of an orbiting body such as the earth is around the sun , 
I repeat, 

  The gyroscopic stabilising influence of the worlds daily spin in HC mode 
disengages the point from the sphere causing it to counter the spin that such 
translation would like to make. You in effect want to keep your "point" or 
world in place around the orbit as though it were like a bead on a string..  
You cannot do that. 

  Allen might call it a different reference frame..  But as you know I do not 
accept them..  But relative motions and the illusions they make.. yes.. true.
  Philip. 


  Neville
  www.GeocentricUniverse.com 


------------------------------------------------------------------------------


  No virus found in this incoming message.
  Checked by AVG Free Edition. 
  Version: 7.5.503 / Virus Database: 269.15.34/1134 - Release Date: 16/11/2007 
9:52 AM

Other related posts: