- Tim, Are you sure COM1 is the correct port? Look at your map program for transferring the maps to your GPS and see which port it uses. Mine uses COM3 but all PC's are different. ----- Original Message ----- From: "Tim & Pam Ueltzen" <timpam@xxxxxxxxxxxxx> To: <geocaching@xxxxxxxxxxxxx> Sent: Sunday, October 03, 2004 9:49 AM Subject: [GeoStL] GSAK Help > - > I can't get waypoints to transfer to my GPS. I get an error message that > says; MAGPROTO cannot open 'com 1' for write. Error was 'Permission > Denied' > > I checked the baud rate they are set the same. NEMA is turned off. > > Can anybody help me with this? > > Thanks > Tim > > > **************************************** > Our WebPage! Http://WWW.GeoStL.com > Mail List Info. //www.freelists.org/cgi-bin/list?list_id=geocaching > Mail List FAQ's: //www.freelists.org/help/questions.html > **************************************** > To unsubscribe from this list: > send an email to geocaching-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > > > **************************************** Our WebPage! Http://WWW.GeoStL.com Mail List Info. //www.freelists.org/cgi-bin/list?list_id=geocaching Mail List FAQ's: //www.freelists.org/help/questions.html **************************************** To unsubscribe from this list: send an email to geocaching-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field