[GeoStL] Re: GSAK Help
- From: "Bruce S" <bruces1321@xxxxxxxxxxx>
- To: geocaching@xxxxxxxxxxxxx
- Date: Sun, 03 Oct 2004 17:47:00 -0500
-
Tim,
By chance did you have IntelliSync for your pda running in background.
If you also sync a pda through com1 IntelliSync takes "possession" of the
com port until it is close... this would give you a permission denied.
Bruce
>From: "Tim & Pam Ueltzen" <timpam@xxxxxxxxxxxxx>
>Reply-To: geocaching@xxxxxxxxxxxxx
>To: <geocaching@xxxxxxxxxxxxx>
>Subject: [GeoStL] Re: GSAK Help
>Date: Sun, 3 Oct 2004 13:24:48 -0500
>
>-
>I got it to work.
>I had the baud rates set the same and nema was turned off. It still
>wouldn't work so I reset XP to a previous date and now it works.
>
>Thanks for all of the suggestion.
>Tim
>
>-----Original Message-----
>From: geocaching-bounce@xxxxxxxxxxxxx
>[mailto:geocaching-bounce@xxxxxxxxxxxxx] On Behalf Of Brad Myers
>Sent: Sunday, October 03, 2004 1:08 PM
>To: geocaching@xxxxxxxxxxxxx
>Subject: [GeoStL] Re: GSAK Help
>
>-
>Do you have the baud rate set the same as the baud rate on the GPS unit?
>I
>know Magellans can change their baud rate, but I think Garmins are
>locked
>in at 4800.
>-----Original Message-----
>From: geocaching-bounce@xxxxxxxxxxxxx
>[mailto:geocaching-bounce@xxxxxxxxxxxxx] On Behalf Of Mike Lusicic
>Sent: Sunday, October 03, 2004 12:38 PM
>To: geocaching@xxxxxxxxxxxxx
>Subject: [GeoStL] Re: GSAK Help
>
>
>-
>I don't think "Permission Denied" is that kind of error. I am with Rich.
>I think Tim has a configuration problem of some sort. I am not sure if
>he checked what Rich was asking about. I think he needs to see WHICH com
>port the successful programs are using. Having listened to a few
>customer support scenarios, when the response repeated that it worked on
>the other programs, and not that he verified the configuration of the
>working program, and that it did have COM1 defined as the port to use,
>it at least raises the question as to whether there may have been a
>miscommunication.... between the people, not the computer and GPS :-)
>
>tklnhl wrote:
>
> >-
> >Sometimes, to get ours to upload we have to first download from the
> >gps to
> >the program THEN the computer can find it to upload.
> >
> >We figure this works on the "unplug it plug it back in" principle.
> >
> >Nancy
> >
> >----- Original Message -----
> >From: "Tim & Pam Ueltzen" <timpam@xxxxxxxxxxxxx>
> >
> >
> >
> >>-
> >>Yes Com 1 is correct. It works with my map to show my position but it
> >>won't work with GSAK or Expert GPS.
> >>
> >>
> >>
> >>>-
> >>>
> >>>
> >>Tim,
> >>
> >>Are you sure COM1 is the correct port? Look at your map program for
> >>transferring the maps to your GPS and see which port it uses. Mine
> >>uses COM3 but all PC's are different.
> >>
> >>
> >>
> >>----- Original Message -----
> >>From: "Tim & Pam Ueltzen" <timpam@xxxxxxxxxxxxx>
> >>
> >>
> >>>>-
> >>>>
> >>>>
> >>>I can't get waypoints to transfer to my GPS. I get an error message
> >>>
> >>>
> >>that
> >>
> >>
> >>>says; MAGPROTO cannot open 'com 1' for write. Error was 'Permission
> >>>Denied'
> >>>
> >>>I checked the baud rate they are set the same. NEMA is turned off.
> >>>
> >>>Can anybody help me with this?
> >>>
> >>>Thanks
> >>>Tim
> >>>
> >>>
> >
> > ****************************************
> > Our WebPage! Http://WWW.GeoStL.com
> > Mail List Info.
>//www.freelists.org/cgi-bin/list?list_id=geocaching
> > Mail List FAQ's: //www.freelists.org/help/questions.html
> > ****************************************
> >To unsubscribe from this list:
> > send an email to geocaching-request@xxxxxxxxxxxxx with 'unsubscribe'
>in
>the Subject field
> >
> >
> >
> >
> >
> >
> >
>
> ****************************************
> Our WebPage! Http://WWW.GeoStL.com
> Mail List Info.
>//www.freelists.org/cgi-bin/list?list_id=geocaching
> Mail List FAQ's: //www.freelists.org/help/questions.html
> ****************************************
>To unsubscribe from this list:
> send an email to geocaching-request@xxxxxxxxxxxxx with 'unsubscribe' in
>the Subject field
>
>
>
>
>
>
> ****************************************
> Our WebPage! Http://WWW.GeoStL.com
> Mail List Info.
>//www.freelists.org/cgi-bin/list?list_id=geocaching
> Mail List FAQ's: //www.freelists.org/help/questions.html
> ****************************************
>To unsubscribe from this list:
> send an email to geocaching-request@xxxxxxxxxxxxx with 'unsubscribe' in
>the Subject field
>
>
>
>
>
> ****************************************
> Our WebPage! Http://WWW.GeoStL.com
> Mail List Info. //www.freelists.org/cgi-bin/list?list_id=geocaching
> Mail List FAQ's: //www.freelists.org/help/questions.html
> ****************************************
>To unsubscribe from this list:
> send an email to geocaching-request@xxxxxxxxxxxxx with 'unsubscribe' in
>the Subject field
>
>
>
>
_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today - it's FREE!
hthttp://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
****************************************
Our WebPage! Http://WWW.GeoStL.com
Mail List Info. //www.freelists.org/cgi-bin/list?list_id=geocaching
Mail List FAQ's: //www.freelists.org/help/questions.html
****************************************
To unsubscribe from this list:
send an email to geocaching-request@xxxxxxxxxxxxx with 'unsubscribe' in the
Subject field
Other related posts:
