[fruityloops] Filthyk's samples (was Re: Automation Problem)

  • From: "AndyEbling" <andyebling@xxxxxxxxxxx>
  • To: <fruityloops@xxxxxxxxxxxxx>
  • Date: Sat, 20 Jul 2002 07:02:44 +0100

> What types of processing do you do when your, say, sampling drum hits,
> notes, etc?
> I did some sampling of my Boss DR770 a couple of weeks ago.  The method I
> used was to take a particular drum kit and hit all 16 pads, spaced apart,
> and saved it in Sound Forge.  Then I went back, topped and tailed, put a
> small (2:1) compression on the hit, and did used a "fade out" option
> saving.
> Seems as though I was getting some strange, hi-frequency noises in the
> sequencer if I didn't do that fade out.  In retrospect, I think those
> may have been "aliasing", which there are filters for in my save options
> SF and Fruity).

Its not background noise being emphasised by the compressor?  (i.e. the
compressor jacking up the gain when the signal is low and hence making the
noise obvious?)

Its hard to say without hearing it.


Other related posts:

  • » [fruityloops] Filthyk's samples (was Re: Automation Problem)