Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit You are correct. It is a Prosoft Solution. See attached. Craig Mercer FeedForward I am almost certain ControlLogix does not natively speak Modbus. It does speak DF1, but you would need to set up a PLC5, or PLC2 capability mode for the Integrator 30 to speak to it. It does not speak tag based DF1. > -----Original Message----- > From: Stan Brown [mailto:stanb@xxxxxxxxx] On Behalf Of Keith, Tommy > Sent: Thursday, March 03, 2011 3:47 PM > To: foxboro@xxxxxxxxxxxxx > Subject: Re: [foxboro] Control Logix and Comm 30 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave