Hi list, i've found this problem on a system running 6.1 The opening of an overlay wit a block faceplate (standard) using the dmcmd command "ov_conn" create this message on the bar :"Invalid Evaluation in Command" What does it means ??? The problem is also that picking the header of the faceplate (it's a PID family ... PIDA-PIDX-PID) there is no autoselect function of SP or OUT and the DM remain freezed for a while - 3-->5 seconds. I'm waiting for the right time to try the installation of a QF of display type ( i know of at least 2 QF for 6.1 & display) but all seems as a strange bug of DM Any similar experience ?? Bye _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave