I am getting the following error when trying to automate a CP upload with the iccdrvrtsk: "ICCupload error class = 20 error = 112 text = ICCupload: error -30 on upload all" I can run the upload without error by manually going into ICC, but I cannot successfully run it from the command line. For what it is worth, I'm trying to run the command from a shell script on an AW that does not host the stations. Also, I can successfully run checkpoints using the iccdrvrtsk. Any help or insight is appreciated. Steve Shimp Maintenance & Systems Engineer ExxonMobil Paulsboro Lube Plant phone: 856.224.5059 cell: 609.820.8501 fax: 856.224.5030 email: steve.shimp@xxxxxxxxxxxxxx _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave