Slim,
I think you need to consider some training either by Schneider or the HART
Foundation. I don't know your plant but most users of IA and HART transmitters
are very concerned to get everything going correctly and to NEVER shut down the
plant or a process due to incorrectly configured devices.
If you are in a rush to get your devices working, you should look for a
consulting engineer with experience in installing IA and HART on your specific
system.
This is not trivial.
Terry
________________________________
From: foxboro-bounce@xxxxxxxxxxxxx <foxboro-bounce@xxxxxxxxxxxxx> on behalf of
slim notslim <slimnotslim@xxxxxxxxx>
Sent: January 9, 2018 3:26 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] [foxboro]ia series communication dtm
2018-01-09 18:43 GMT+01:00 slim notslim <slimnotslim@xxxxxxxxx>:
dear listeFreeLists / Foxboro Discussion List<//www.freelists.org/list/foxboro>
i like to use the HART option but i dont know how to to do i downloaded the
*PACTware* 5.0.zip from schneider site but i dont know how to start and
what i need to begin
we are on foxEVO 9.2 on the mesh network using fcp280, fbm214b and fbm244
please helpto start i m noob
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at
www.thecassandraproject.org/disclaimer.html<http://www.thecassandraproject.org/disclaimer.html>
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
