Re: [foxboro] foxboro Digest V8 #14
- From: "Doucet, Terrence" <tdoucet@xxxxxxxxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Tue, 15 Jan 2008 18:48:29 -0500
RGC,
I apologize if you have already answered this question, but do you get any
alarms on the station in the CAD ?
The other thing to check would be your /usr/fox/cs/dm_recon ro see what
cs_dm.current says about your WP.
Terry
________________________________
From: foxboro-bounce@xxxxxxxxxxxxx on behalf of Rguercio@xxxxxxx
Sent: Tue 1/15/2008 5:16 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] foxboro Digest V8 #14
In a message dated 1/15/2008 12:13:19 Central Standard Time,
foxboro@xxxxxxxxxxxxx writes:
The easiest way of detecting duplicate Compound:Block entries in the
file is the following:
Thanks to everybody who has responded to my problem. There is still a
problem, and here is what I have done:
I am very familiar with the loadalmpnl and prtalmpnl commands and use them
all the time. They make the panel buttons work and produce the exact file
contents I would expect. I am not having trouble with the AApan file and
key-pushing functions. My problem is: I cannot get the associated AAtab file
to
be recognized (can't get alarms to light ANY LED's).
Before this last round of help, I had already checked for duplicates in the
...AAtab file using the Excel route (and thanks everyone for the other
dup-checking utilities which I will keep in my bag of Foxboro Tricks), and I
actually started from scratch with FoxPanels configurator and set up a simple
panel. Sure enough, the AApan file created made the key-pushes work, but I
could
not get any LED's to light. I verified that the ...AA... files I had
previously created had both the same name and same format as those created by
FoxPanels, thus eliminating that path. The only difference was that
FoxPanels, of
course, created the <LBUG>.apc file, whereas I had never seen that file in
/usr/fox/alarms before. I thought, "aha, here is the problem, even though
dozens of other workstations have been working successfully without it for
years". Despite all this, the new ...AAtab file apparently isn't getting
recognized, as the new annunciator setup would not report any alarms to the
LED's.
Sorry this is so long, but I wanted to make sure everyone understood the
situation. That given, is there any wisdom to be had?
RGC
12803 Josey Creek Ct.
Cypress, TX 77433
713-805-8742 cell
281-256-1111 home office/FAX
281-256-1333 home
**************Start the year off right. Easy ways to stay in shape.
http://body.aol.com/fitness/winter-exercise?NCID=aolcmp00300000002489
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
-- No attachments (even text) are allowed --
-- Type: application/ms-tnef
-- File: winmail.dat
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
