Re: [foxboro] System getting hanged
- From: "Boulay, Russ" <Russ.Boulay@xxxxxxxxxxxxxxxxxxxxxx>
- To: "foxboro@xxxxxxxxxxxxx" <foxboro@xxxxxxxxxxxxx>
- Date: Thu, 24 Apr 2014 13:37:17 -0400
When you say lost GPS signal from an AW, do you mean lost MTK...or are your
controllers pulsed sync'd thru the GPS hardware equipment?
MTK does broadcast at 10 minute intervals.
This occurs on the 10 minute marks of an hour.....so at 0, 10.20,30
etc...minutes past the hour.
So 00:00 would have coincided with a broadcast, recovery at 10:00 would have
been next broadcast.
The effect on your system...i would ask did the time go negative at all from
its previous reading...
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of RAKESH DASH
Sent: Thursday, April 24, 2014 10:25 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] System getting hanged
Hi,
It so happened that all controllers & workstation lost GPS signal from
AW1001 workstation. This happened at 00:00:00 hrs. During this period the
historian got hanged & the operator workstation became very slow. The
synchronisation was back at 00:03:00 & historian came back to normalcy
automatically by 00:10:00. Can someone suggest if GPS can cause such sort of
problem ?
Please share ur views. I m stuck & don't know how to avoid it happening again.
Rgds,
Rakes Dash
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process Systems
(formerly The Foxboro Company). Use the info you obtain here at your own risks.
Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
______________________________________________________________________
*** Confidentiality Notice: This e-mail, including any associated or attached
files, is intended solely for the individual or entity to which it is
addressed. This e-mail is confidential and may well also be legally privileged.
If you have received it in error, you are on notice of its status. Please
notify the sender immediately by reply e-mail and then delete this message from
your system. Please do not copy it or use it for any purposes, or disclose its
contents to any other person. This email comes from a division of the Invensys
Group, owned by Invensys Limited, which is a company registered in England and
Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X
7AW (Registered number 166023). For a list of European legal entities within
the Invensys Group, please select the Legal Entities link at invensys.com.
Invensys Limited is owned by the Schneider-Electric Group.
You may contact Invensys Limited on +44 (0)20 3155 1200 or e-mail
reception@xxxxxxxxxxxx. This e-mail and any attachments thereto may be subject
to the terms of any agreements between Invensys (and/or its subsidiaries and
affiliates) and the recipient (and/or its subsidiaries and affiliates).
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
