Re: [foxboro] System Counter Monitoring
- From: <Jack.Easley@xxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Wed, 7 Apr 2010 15:21:56 -0500
These are the programs FoxTac pointed me to in the past, but they were
only there if you had Foxwatch installed.
Jack Easley
Sr. I&C Technician
Luminant Power, Martin Lake Plant
Phone 903.836.6273
jack.easley@xxxxxxxxxxxx
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of William C Ricker
Sent: Wednesday, April 07, 2010 2:01 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] System Counter Monitoring
Don't know about the V8 systems, but for 6 and 7 there was a pair of
programs,
'remd' and 'remv'which essentially provide a command line interface to
the
system
monitor. It isn't particularly fun, but scripts can be built around
these to
extract counter and status information.
These seem to have been installed by the FoxWatch software install, but
I've
never
seen any specific statement as to who has license to use it and who does
not.
Also, it was available in Quick Fixes for various platforms/versions.
Regards,
William C Ricker
FeedForward, Inc.
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On
Behalf Of Steinbrecher, Nick
Sent: Wednesday, April 07, 2010 10:20 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] System Counter Monitoring
List,
I am looking for suggestions on how to monitor all those system counters
that exist under the PERF tab on the System Management display. There
are a lot of counters there. More than you can routinely check on. I
was wondering if anyone had any tools or way to access these values and
then generate some kind of notification when one of them went out of
wack. We had a problem last year that was warned of by an increase in
MAC resets but nobody looked at this until the problem was upon us.
Knowing that this was increasing would have given us time to deal with
it before it rose to the level that plant operators saw a problem.
> Nick Steinbrecher
> Process Control Engineer
> (908)-474-3565
> email E.STEINBRECHER@xxxxxxxxxxxx
>
>
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Confidentiality Notice: This email message, including any attachments,
contains or may contain confidential information intended only for the
addressee. If you are not an intended recipient of this message, be
advised that any reading, dissemination, forwarding, printing, copying
or other use of this message or its attachments is strictly prohibited. If
you have received this message in error, please notify the sender
immediately by reply message and delete this email message and any
attachments from your system.
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
