Re: [foxboro] Sys Mon
- From: "Landry, Scott" <Scott.Landry@xxxxxxxxxxxx>
- To: "foxboro@xxxxxxxxxxxxx" <foxboro@xxxxxxxxxxxxx>
- Date: Thu, 14 Feb 2013 11:07:15 -0500
Brian,
What Russ says about restarting your system monitors may work but ..
you also should contact your local Invensys/Foxboro Service Representitive
to check remenants due to commitals, looking at Solution 114 and Solution
1200
as a guide.
Regards,
Scott
________________________________________
From: foxboro-bounce@xxxxxxxxxxxxx [foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of
Boulay, Russ [Russ.Boulay@xxxxxxxxxxxx]
Sent: Thursday, February 14, 2013 9:52 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] Sys Mon
If the Network error is being caused by the intelligent FBM networks you will
have to find those in the smon logs if you see a consistent device that is
always reporting an issue.
Short of anything obvious.....stop and restart your sysmon's to see if they
clear...
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Brian Long
Sent: Thursday, February 14, 2013 7:01 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] Sys Mon
Yes, every station is red. From the NETWORK pick in SYSMON there are no
indications of any errors, (NETWORK WHITE) checked every station/CP/FBM and
Digital Transmitter. Is there no way to search for the errors?
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Boulay, Russ
Sent: Thursday, February 14, 2013 8:43 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] Sys Mon
Does every workstation have the SYS key read..?
Or just workstations for a particular SMON..?
If every station...then a Network alarm has occurred.
Network alarm can be caused by the usual Network/Nodebus issues but also
intelligent type I/O like Foundation Fieldbus, Profibus, HART etc...
Those type of IO use a "network" type of communications....
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Brian Long
Sent: Thursday, February 14, 2013 5:34 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] Sys Mon
Anyone know of a way to figure out which SYSMON might be having an issue?
Our SYS light is red but we show no errors on anything.
Thanks,
Brian Long
Arkansas Kraft
*** Confidentiality Notice: This e-mail, including any associated or attached
files, is intended solely for the individual or entity to which it is
addressed. This e-mail is confidential and may well also be legally privileged.
If you have received it in error, you are on notice of its status. Please
notify the sender immediately by reply e-mail and then delete this message from
your system. Please do not copy it or use it for any purposes, or disclose its
contents to any other person. This email comes from a division of the Invensys
Group, owned by Invensys plc, which is a company registered in England and
Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X
7AW (Registered number 166023). For a list of European legal entities within
the Invensys Group, please select the Legal Entities link at invensys.com.
You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail
reception@xxxxxxxxxxxx. This e-mail and any attachments thereto may be subject
to the terms of any agreements between Invensys (and/or its subsidiaries and
affiliates) and the recipient (and/or its subsidiaries and affiliates).
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
