And what was you expecting for?=20 The solution is... move everything to V8.3 Regards -----Mensaje original----- De: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]En nombre de Ed Zychowski Enviado el: Viernes, 20 de Julio de 2007 13:37 Para: foxboro@xxxxxxxxxxxxx Asunto: [foxboro] Silencing horns across the ATS All knowing group, We have both 8.3 XP P92s and WP51Ds 6.5.1 in our control room. The P92s=20 and Mesh have recently been added. All workstations have an annunciator=20 keyboard. All workstations are in the same common alarm group=20 (commgrp.cfg). Our intention was that when the operator pressed the=20 silence button on any annunciator, all horns would silence (as it did=20 before the P92s). As it turns out, the ability to silence horns can not=20 done across the ATS. Has anyone found a solution? =20 =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html =20 foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin to unsubscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave